CFlowCompOutput Class Reference

Output class for compressible flow problems. More...

#include <CFlowCompOutput.hpp>

Inheritance diagram for CFlowCompOutput:

Public Member Functions
	CFlowCompOutput (const CConfig *config, unsigned short nDim)
	Constructor of the class.
void	LoadHistoryData (CConfig *config, CGeometry *geometry, CSolver **solver) override
	Load the history output field values.
void	LoadHistoryData (CConfig *config, CGeometry *geometry, CSolver **solver, unsigned short iZone)
void	SetVolumeOutputFields (CConfig *config) override
	Set the available volume output fields.
void	LoadVolumeData (CConfig *config, CGeometry *geometry, CSolver **solver, unsigned long iPoint) override
	Set the values of the volume output fields for a point.
void	SetHistoryOutputFields (CConfig *config) override
	Set the available history output fields.
void	SetTurbomachineryObjectiveFunctions (CSolver *solver, CConfig *config)
bool	SetInitResiduals (const CConfig *config) override
	Check whether the base values for relative residuals should be initialized.
void	SetAdditionalScreenOutput (const CConfig *config) override
	Write any additional output defined for the current solver.
bool	WriteHistoryFileOutput (const CConfig *config) override
	Determines if the history file output.
void	SetTurboPerformance_Output (su2vector< std::shared_ptr< CTurboOutput > > TurboBladePerfs, CConfig *config, unsigned long TimeIter, unsigned long OuterIter, unsigned long InnerIter) override
	Sets the turboperformance screen output.
void	SetTurboMultiZonePerformance_Output (std::shared_ptr< CTurbomachineryStagePerformance > TurboStagePerf, su2vector< std::shared_ptr< CTurboOutput > > TurboBladePerfs, CConfig *config) override
	Sets the multizone turboperformacne screen output.
void	LoadTurboHistoryData (std::shared_ptr< CTurbomachineryStagePerformance > TurboStagePerf, su2vector< std::shared_ptr< CTurboOutput > > TurboBladePerfs, CConfig *config) override
	Loads the turboperformacne history data.
void	WriteTurboSpanwisePerformance (su2vector< std::shared_ptr< CTurboOutput > > TurboBladePerfs, CGeometry *geometry, CConfig **config, unsigned short val_iZone) override
	Write the kinematic and thermodynamic variables at each spanwise division.
Public Member Functions inherited from COutput
	COutput (const CConfig *config, unsigned short nDim, bool femOutput)
	Constructor of the class.
void	PreprocessVolumeOutput (CConfig *config)
	Preprocess the volume output by setting the requested volume output fields.
void	LoadData (CGeometry *geometry, CConfig *config, CSolver **solver_container)
	Load the data from the solvers into the data sorters and sort it for the linear partitioning.
void	PreprocessHistoryOutput (CConfig *config, bool wrt=true)
	Preprocess the history output by setting the history fields and opening the history file.
void	PreprocessMultizoneHistoryOutput (COutput **output, CConfig **config, CConfig *driver_config, bool wrt=true)
	Preprocess the history output by setting the history fields and opening the history file.
void	SetHistoryOutput (CGeometry *geometry, CSolver **solver_container, CConfig *config, unsigned long TimeIter, unsigned long OuterIter, unsigned long InnerIter)
	Collects history data from the solvers, monitors the convergence and writes to screen and history file.
void	SetHistoryOutput (CGeometry *geometry, CSolver **solver_container, CConfig *config)
	Collects history data from the solvers and monitors the convergence. Does not write to screen or file.
void	SetHistoryOutput (CGeometry ****geometry, CSolver *****solver_container, CConfig **config, std::shared_ptr< CTurbomachineryStagePerformance > TurboStagePerf, su2vector< std::shared_ptr< CTurboOutput > > TurboBladePerfs, unsigned short val_iZone, unsigned long TimeIter, unsigned long OuterIter, unsigned long InnerIter, unsigned short val_iInst)
	Collects history data from the solvers, monitors the convergence and writes to screen and history file.
void	SetMultizoneHistoryOutput (COutput **output, CConfig **config, CConfig *driver_config, unsigned long TimeIter, unsigned long OuterIter)
void	SetObjectiveFunctionValues (CGeometry *geometry, CSolver **solver_container, CConfig *config)
	Evaluates objective functions in the (multiphysics) discrete adjoint solver.
void	SetVolumeFilename (string filename)
	Sets the volume output filename.
void	SetSurfaceFilename (string filename)
	Sets the surface output filename.
string	GetVolumeFilename ()
	Returns the current volume filename.
string	GetSurfaceFilename ()
	Returns the current surface filename.
void	SetRestartFilename (string filename)
	Sets the restart filename.
string	GetRestartFilename ()
	Returns the current restart filename.
void	SetIteration (unsigned long TimeIter, unsigned long OuterIter, unsigned long InnerIter)
	Set the current iteration indices.
su2double	GetHistoryFieldValue (const string &name) const
	Get the value of particular history output field.
void	ResetConvergenceMonitoring (unsigned long Iteration)
	Discard the convergence history and count it from the given iteration instead.
vector< pair< string, passivedouble > >	GetResidualConvFields () const
	Names and values of the fields convergence is monitored on that are residuals.
su2double	GetHistoryFieldValuePerSurface (const string &name, unsigned short iMarker) const
	Get the value of particular surface history output field.
vector< HistoryOutputField >	GetHistoryGroup (string groupname)
	Get a vector with all output fields in a particular group.
const vector< string > &	GetHistoryOutputList () const
	Get the list of all output fields.
const vector< string > &	GetHistoryOutputPerSurfaceList () const
	Get the list of all per-surface fields.
const map< string, HistoryOutputField > &	GetHistoryFields () const
	Get the map containing all output fields.
const map< string, vector< HistoryOutputField > > &	GetHistoryPerSurfaceFields () const
	Get the map containing all output per-surface fields.
bool	ConvergenceMonitoring (CConfig *config, unsigned long Iteration)
	Monitor the convergence of an output field.
void	PrintConvergenceSummary ()
	Print a summary of the convergence to screen.
bool	GetConvergence () const
	Get convergence of the problem.
bool	GetConvergenceInterrupted () const
	Get whether the exit was forced by an interrupt signal (e.g. SIGTERM) instead of the convergence criteria.
void	SetConvergence (const bool conv)
	Set the value of the convergence flag.
bool	MonitorTimeConvergence (CConfig *config, unsigned long Iteration)
	Monitor the time convergence of the specified windowed-time-averaged ouput.
void	PrintHistoryFields () const
	Print a list of all history output fields to screen.
void	PrintVolumeFields ()
	Print a list of all volume output fields to screen.
bool	SetResultFiles (CGeometry *geometry, CConfig *config, CSolver **solver_container, unsigned long iter, bool force_writing=false)
	Loop through all requested output files and write the volume output data.
bool	GetCauchyCorrectedTimeConvergence (const CConfig *config)
	Get convergence time convergence of the specified windowed-time-averaged ouput of the problem. Delays solver stop, if Cauchy time convergence criterion is fullfilled, but 2nd order time marching is active, to ensure that enough restart files are written.
void	WriteToFile (CConfig *config, CGeometry *geometry, OUTPUT_TYPE format, string fileName="")
	Allocates the appropriate file writer based on the chosen format and writes sorted data to file.
virtual	~COutput (void)
	Destructor of the class.

Additional Inherited Members
Protected Types inherited from COutput
enum class	ScreenOutputFormat { INTEGER , FIXED , SCIENTIFIC , PERCENT }
	: Flag for delaying stop at max_time with 2nd order time stepping. More...
enum class	HistoryFieldType {   RESIDUAL , AUTO_RESIDUAL , COEFFICIENT , AUTO_COEFFICIENT ,   DEFAULT }
	Enum to identify the screen/history field type. More...
enum class	OperationType {   MACRO , FUNCTION , AREA_AVG , AREA_INT ,   MASSFLOW_AVG , MASSFLOW_INT , PROBE }
	Type of operation for custom outputs. More...
Protected Member Functions inherited from CFlowOutput
	CFlowOutput (const CConfig *config, unsigned short nDim, bool femOutput)
	Constructor of the class.
void	AddTurboOutput (unsigned short nZone)
	Add turboperformance outputs as history field.
void	LoadSurfaceData (CConfig *config, CGeometry *geometry, CSolver **solver, unsigned long iPoint, unsigned short iMarker, unsigned long iVertex) override
	Set the values of the volume output fields for a surface point.
void	AddAnalyzeSurfaceOutput (const CConfig *config)
	Add flow surface output fields.
void	SetAnalyzeSurface (const CSolver *const *solver, const CGeometry *geometry, CConfig *config, bool output)
	Set flow surface output field values.
void	SetAnalyzeSurfaceSpeciesVariance (const CSolver *const *solver, const CGeometry *geometry, CConfig *config, const su2activematrix &Surface_Species_Total, const vector< su2double > &Surface_MassFlow_Abs_Total, const vector< su2double > &Surface_Area_Total)
	Compute and Set flow species variance output field values.
void	AddHistoryOutputFields_ScalarRMS_RES (const CConfig *config)
	Add scalar (turbulence/species) history fields for the Residual RMS (FVMComp, FVMInc, FVMNEMO).
void	AddHistoryOutputFields_ScalarMAX_RES (const CConfig *config)
	Add scalar (turbulence/species) history fields for the max Residual (FVMComp, FVMInc, FVMNEMO).
void	AddHistoryOutputFields_ScalarBGS_RES (const CConfig *config)
	Add scalar (turbulence/species) history fields for the BGS Residual (FVMComp, FVMInc, FVMNEMO).
void	AddHistoryOutputFieldsScalarLinsol (const CConfig *config)
	Add scalar (turbulence/species) history fields for the linear solver (FVMComp, FVMInc, FVMNEMO).
void	LoadHistoryDataScalar (const CConfig *config, const CSolver *const *solver)
	Set all scalar (turbulence/species) history field values.
void	LoadCustomAndComboObjectiveFunctions (CConfig *config, CGeometry *geometry, CSolver **solver) override
	Recompute history output field values that can be used as objective functions in the (multiphysics) discrete adjoint solver.
void	SetVolumeOutputFieldsScalarSolution (const CConfig *config)
	Add scalar (turbulence/species) volume solution fields for a point (FVMComp, FVMInc, FVMNEMO).
void	SetVolumeOutputFieldsScalarResidual (const CConfig *config)
	Add scalar (turbulence/species) volume solution fields for a point (FVMComp, FVMInc, FVMNEMO).
void	SetVolumeOutputFieldsScalarPrimitive (const CConfig *config)
	Add scalar (turbulence/species) volume primitive fields for a point (FVMComp, FVMInc, FVMNEMO).
void	SetVolumeOutputFieldsScalarLimiter (const CConfig *config)
	Add scalar (turbulence/species) volume limiter fields for a point (FVMComp, FVMInc, FVMNEMO).
void	SetVolumeOutputFieldsScalarSource (const CConfig *config)
	Add flamelet volume source term fields for a point (FVMComp, FVMInc, FVMNEMO).
void	SetVolumeOutputFieldsScalarLookup (const CConfig *config)
	Add flamelet volume lookup value fields for a point (FVMComp, FVMInc, FVMNEMO).
void	SetVolumeOutputFieldsScalarMisc (const CConfig *config)
	Add miscellaneous scalar volume fields for a point (FVMComp, FVMInc, FVMNEMO).
void	LoadVolumeDataScalar (const CConfig *config, const CSolver *const *solver, const CGeometry *geometry, const unsigned long iPoint)
	Set all scalar (turbulence/species) volume field values for a point.
void	AddAerodynamicCoefficients (const CConfig *config)
	Add aerodynamic coefficients as output fields.
void	SetAerodynamicCoefficients (const CConfig *config, const CSolver *flow_solver)
	Set the value of the aerodynamic coefficients.
void	AddHeatCoefficients (const CConfig *config)
	Add heat flux coefficients as output fields.
void	SetHeatCoefficients (const CConfig *config, const CSolver *flow_solver)
	Set the value of the heat flux coefficients.
void	AddRotatingFrameCoefficients ()
	Add rotating frame coefficients as output fields.
void	SetRotatingFrameCoefficients (const CSolver *flow_solver)
	Set the value of the rotating frame coefficients (CT, CQ and CMerit).
void	AddCpInverseDesignOutput ()
	Add CP inverse design output as history fields.
void	SetCpInverseDesign (CSolver *solver, const CGeometry *geometry, const CConfig *config)
	Set CP inverse design output field values (and also into the solver).
void	AddNearfieldInverseDesignOutput ()
	Add nearfield inverse design output as history fields.
void	SetNearfieldInverseDesign (CSolver *solver, const CGeometry *geometry, const CConfig *config)
	Set nearfield inverse design output field values (and also into the solver).
void	SetCustomOutputs (const CSolver *const *solver, const CGeometry *geometry, const CConfig *config)
	Compute the custom outputs.
void	ConvertVariableSymbolsToIndices (const CPrimitiveIndices< unsigned long > &idx, bool allowSkip, CustomOutput &output) const
	Helper for custom outputs, converts variable names to indices and pointers which are then used to evaluate the custom expressions.
template<class T >
su2double	GetQCriterion (const T &VelocityGradient) const
	Compute value of the Q criteration for vortex idenfitication.
template<class GeoNodes >
su2double	GetAxiFactor (bool axisymmetric, const GeoNodes &nodes, unsigned long iPoint, unsigned short iMarker)
	Returns the axisymmetric factor for a point on a marker.
void	WriteMetaData (const CConfig *config)
	Write information to meta data file.
void	WriteAdditionalFiles (CConfig *config, CGeometry *geometry, CSolver **solver_container) override
	Write any additional files defined for the current solver.
bool	WriteVolumeOutput (CConfig *config, unsigned long Iter, bool force_writing, unsigned short iFile) override
	Determines if the the volume output should be written.
void	WriteForcesBreakdown (const CConfig *config, const CSolver *flow_solver) const
	Write the forces breakdown file.
void	SetTimeAveragedFields (const CConfig *config)
	Set the time averaged output fields.
void	LoadTimeAveragedData (unsigned long iPoint, const CVariable *node_flow, const CVariable *node_turb, const CConfig *config)
	Load the time averaged output fields.
void	SetFixedCLScreenOutput (const CConfig *config)
	Write additional output for fixed CL mode.
su2double	GetEnergyBackscatterRatio (unsigned long iPoint, const CConfig *config, const CVariable *node_flow, const CVariable *node_turb)
	Compute the ratio of the stochastic energy backscatter to the turbulent energy dissipation.
Protected Member Functions inherited from CFVMOutput
	CFVMOutput (const CConfig *config, unsigned short nDim, bool femOutput)
	Constructor of the class.
void	AddCoordinates ()
	Add Coordinates to output.
template<class T >
void	LoadCoordinates (const T &Coord, const unsigned long iPoint)
	Load the coordinates.
void	AddCommonFVMOutputs (const CConfig *config)
	Add common FVM outputs.
void	LoadCommonFVMOutputs (const CConfig *config, const CGeometry *geometry, unsigned long iPoint)
	Load common FVM outputs.
Protected Member Functions inherited from COutput
void	SetHistoryFileHeader (const CConfig *config)
	Set the history file header.
void	SetHistoryFileOutput (const CConfig *config)
	Write the history file output.
void	SetScreenHeader (const CConfig *config)
	Write the screen header.
void	SetScreenOutput (const CConfig *config)
	Write the screen output.
void	AddHistoryOutput (string name, string field_name, ScreenOutputFormat format, string groupname, string description, HistoryFieldType field_type=HistoryFieldType::DEFAULT)
	Add a new field to the history output.
void	SetHistoryOutputValue (string name, su2double value)
	Set the value of a history output field.
void	AddHistoryOutputPerSurface (string name, string field_name, ScreenOutputFormat format, string groupname, const vector< string > &marker_names, HistoryFieldType field_type=HistoryFieldType::DEFAULT)
	Add a new field per surface marker to the history output.
void	SetHistoryOutputPerSurfaceValue (string name, su2double value, unsigned short iMarker)
	Set the value of a history output field for a specific surface marker.
const su2double *	GetPtrToHistoryOutput (const string &name) const
	Returns a pointer to the value of an history output.
void	SetupCustomHistoryOutput (const string &expression, CustomHistoryOutput &output) const
	Setup a custom history output object for a given expression.
void	AddVolumeOutput (const string &name, const string &field_name, const string &group_name, const string &description)
	Add a new field to the volume output.
su2double	GetVolumeOutputValue (const string &name, unsigned long iPoint)
	Set the value of a volume output field.
void	SetVolumeOutputValue (const string &name, unsigned long iPoint, su2double value)
	Set the value of a volume output field.
void	SetAvgVolumeOutputValue (const string &name, unsigned long iPoint, su2double value)
	Set the value of a volume output field.
void	CheckHistoryOutput (unsigned short nZone)
	CheckHistoryOutput.
void	CheckFullMG_Startup (const CConfig *config) const
	Check that the Full-MG startup has a criterion left to promote the active level on.
void	PrepareHistoryFile (CConfig *config)
	Open the history file and write the header.
void	LoadDataIntoSorter (CConfig *config, CGeometry *geometry, CSolver **solver)
	Load up the values of the requested volume fields into ::Local_Data array.
void	PostprocessHistoryData (CConfig *config)
	Postprocess_HistoryData.
void	PostprocessHistoryFields (CConfig *config)
	Postprocess_HistoryFields.
bool	PrintOutput (unsigned long iIter, unsigned long iFreq)
	Check whether we should print output.
void	OutputScreenAndHistory (CConfig *config)
	Write screen and history output.
void	SetCommonHistoryFields ()
	Set the history fields common for all solvers.
void	RequestCommonHistory (bool dynamic)
	Request the history fields common for all solvers.
void	SetCustomOutputs (const CConfig *config)
	Parses user-defined outputs.
void	ComputeSimpleCustomOutputs (const CConfig *config)
	Evaluates function-type custom outputs. Derived classes can use this to compute simple expressions of other outputs if they do not implement surface averages. This should be called just before evaluating the custom objective function.
void	LoadCommonHistoryData (const CConfig *config)
	Load values of the history fields common for all solvers.
void	AllocateDataSorters (CConfig *config, CGeometry *geometry)
	Allocates the data sorters if necessary.
void	SetCustomAndComboObjectives (int idxSol, const CConfig *config, CSolver **solver)
	Computes the custom and combo objectives.
virtual bool	WriteScreenHeader (const CConfig *config)
	Determines if the screen header should be written.
virtual bool	WriteScreenOutput (const CConfig *config)
	Determines if the screen header should be written.
virtual void	LoadVolumeDataFEM (CConfig *config, CGeometry *geometry, CSolver **solver, unsigned long iElem, unsigned long index, unsigned short dof)
	Set the values of the volume output fields for a point.
virtual void	LoadMultizoneHistoryData (const COutput *const *output, const CConfig *const *config)
	Load the multizone history output field values.
virtual void	SetMultizoneHistoryOutputFields (const COutput *const *output, const CConfig *const *config)
	Set the available multizone history output fields.
Protected Attributes inherited from CFlowOutput
unsigned long	lastInnerIter
Protected Attributes inherited from COutput
const int	rank
	MPI Rank.
const int	size
	MPI Size.
const unsigned short	nDim
	Physical Dimension.
const bool	multiZone
	Boolean to store whether we are running a multizone problem.
const bool	gridMovement
	Boolean to store whether we have grid movement enabled.
const bool	femOutput
	Boolean to store whether we should use the FEM routines.
const bool	si_units
const bool	us_units
const unsigned short	fieldWidth = 12
	Width of each column for the screen output (hardcoded for now)
string	historySep
	Character which separates values in the history file.
bool	noWriting
	Boolean indicating whether a screen/history output should be written.
unsigned long	curTimeIter
	Current value of the time iteration index.
unsigned long	curAbsTimeIter
	Current value of the time iteration index.
unsigned long	curOuterIter
	Current value of the outer iteration index.
unsigned long	curInnerIter
	Current value of the inner iteration index.
su2double	PrevStopTime
	Previous stop time for iteration timing.
string	historyFilename
	The history filename.
ofstream	histFile
	Output file stream for the history.
bool	cauchyTimeConverged
bool	maxTimeDelayActive
	: Flag indicating that solver is already converged. Needed for writing restart files.
std::map< string, HistoryOutputField >	historyOutput_Map
	Associative map to access data stored in the history output fields by a string identifier.
std::vector< string >	historyOutput_List
	Vector that contains the keys of the historyOutput_Map in the order of their insertion.
std::map< string, vector< HistoryOutputField > >	historyOutputPerSurface_Map
	Associative map to access data stored in the history per surface output fields by a string identifier.
std::vector< string >	historyOutputPerSurface_List
	Vector that contains the keys of the historyOutputPerSurface_Map in the order of their insertion.
std::vector< string >	requestedHistoryFields
	Requested history field names in the config file.
unsigned short	nRequestedHistoryFields
	Number of requested history field names in the config file.
std::vector< string >	requestedScreenFields
	Requested screen field names in the config file.
unsigned short	nRequestedScreenFields
	Number of requested screen field names in the config file.
std::vector< const su2double * >	requestedHistoryFieldCache
	Caches to avoid hashing the output maps to retrieve field values.
std::vector< const HistoryOutputField * >	requestedScreenFieldCache
PrintingToolbox::CTablePrinter *	convergenceTable
	Convergence output table structure.
PrintingToolbox::CTablePrinter *	multiZoneHeaderTable
	Multizone header output structure.
PrintingToolbox::CTablePrinter *	historyFileTable
	Table structure for writing to history file.
PrintingToolbox::CTablePrinter *	fileWritingTable
	File writing header.
std::string	multiZoneHeaderString
	Multizone header string.
bool	headerNeeded
	Boolean that stores whether a screen header is needed.
map< string, CWindowedAverage >	windowedTimeAverages
	Structure to store the value of the running averages.
std::map< string, su2double >	initialResiduals
	Structure to store the value initial residuals for relative residual computation.
CustomHistoryOutput	customObjFunc
	User-defined expression for a custom objective.
std::vector< CustomOutput >	customOutputs
	User-defined outputs.
CParallelDataSorter *	volumeDataSorter
	Volume data sorter.
CParallelDataSorter *	volumeDataSorterCompact
	Volume data sorter for compact files.
CParallelDataSorter *	surfaceDataSorter
	Surface data sorter.
vector< string >	volumeFieldNames
	Vector containing the volume field names.
vector< string >	requiredVolumeFieldNames
	Vector containing the minimum required volume field names.
string	volumeFilename
	Volume output filename.
string	surfaceFilename
	Surface output filename.
string	restartFilename
	Restart output filename.
std::map< string, VolumeOutputField >	volumeOutput_Map
	Associative map to access data stored in the volume output fields by a string identifier.
std::vector< string >	volumeOutput_List
	Vector that contains the keys of the volumeOutput_Map in the order of their insertion.
bool	buildFieldIndexCache
	Whether the field index caches should be build.
std::vector< short >	fieldIndexCache
	Vectors to cache the positions of the fields in the data array.
std::vector< short >	fieldIndexCacheCompact
unsigned short	cachePosition
	Current value of the cache indices.
std::vector< short >	fieldGetIndexCache
	Vector to cache the positions of the field in the data array.
unsigned short	curGetFieldIndex
	Current value of the cache index.
std::vector< string >	requestedVolumeFields
	Requested volume field names in the config file.
unsigned short	nRequestedVolumeFields
	Number of requested volume field names in the config file.
const std::vector< string >	restartVolumeFields = {"COORDINATES", "SOLUTION", "SENSITIVITY", "GRID_VELOCITY"}
	Minimum required volume fields for restart file.
su2double	cauchyValue
	Summed value of the convergence indicator.
su2double	cauchyFunc
	Current value of the convergence indicator at one iteration.
unsigned short	Cauchy_Counter
	Number of elements of the Cauchy serial.
vector< vector< su2double > >	cauchySerie
	Complete Cauchy serial.
unsigned long	nCauchy_Elems
	Total number of cauchy elems to monitor.
su2double	cauchyEps
	Defines the threshold when to stop the solver.
su2double	minLogResidual
	Minimum value of the residual to reach.
vector< su2double >	oldFunc
	Old value of the coefficient.
vector< su2double >	newFunc
	Current value of the coefficient.
bool	convergence
	To indicate if the solver has converged or not.
bool	convergenceInterrupted
	To indicate that the exit was forced by an interrupt signal instead of the convergence criteria.
su2double	initResidual
	Initial value of the residual to evaluate the convergence level.
vector< string >	convFields
	Name of the field to be monitored for convergence.
unsigned long	convergenceStartIter = 0
	Iteration the convergence history is counted from.
su2double	rhoResNew
su2double	rhoResOld
vector< string >	wndConvFields
	Name of the field to be monitored for convergence.
vector< vector< su2double > >	WndCauchy_Serie
	Complete Cauchy serial.
unsigned long	nWndCauchy_Elems
	Total number of cauchy elems to monitor.
su2double	wndCauchyEps
	Defines the threshold when to stop the solver.
vector< su2double >	WndOld_Func
	Old value of the objective function (the function which is monitored).
vector< su2double >	WndNew_Func
	Current value of the objective function (the function which is monitored).
su2double	WndCauchy_Func
	Current value of the convergence indicator at one iteration.
su2double	WndCauchy_Value
	Summed value of the convergence indicator.
bool	TimeConvergence
	To indicate, if the windowed time average of the time loop has converged.

Detailed Description

Output class for compressible flow problems.

Author

R. Sanchez, T. Albring.

Date

May 30, 2018.

Constructor & Destructor Documentation

CFlowCompOutput()

CFlowCompOutput::CFlowCompOutput	(	const CConfig *	config,
		unsigned short	nDim
	)

Constructor of the class.

Parameters

[in]

config

- Definition of the particular problem.

Member Function Documentation

LoadHistoryData() [1/2]

void CFlowCompOutput::LoadHistoryData ( CConfig *  config, CGeometry *  geometry, CSolver **  solver  )

overridevirtual

Load the history output field values.

Parameters

[in]

config

- Definition of the particular problem.

Reimplemented from COutput.

LoadHistoryData() [2/2]

void CFlowCompOutput::LoadHistoryData	(	CConfig *	config,
		CGeometry *	geometry,
		CSolver **	solver,
		unsigned short	iZone
	)

LoadTurboHistoryData()

void CFlowCompOutput::LoadTurboHistoryData ( std::shared_ptr< CTurbomachineryStagePerformance >  TurboStagePerf, su2vector< std::shared_ptr< CTurboOutput > >  TurboBladePerfs, CConfig *  config  )

overridevirtual

Loads the turboperformacne history data.

Parameters

[in]	TurboStagePerf	- Stage turboperformance class
[in]	TurboPerf	- Turboperformance class
[in]	config	- Definition of the particular problem

Reimplemented from COutput.

LoadVolumeData()

void CFlowCompOutput::LoadVolumeData ( CConfig *  config, CGeometry *  geometry, CSolver **  solver, unsigned long  iPoint  )

overridevirtual

Set the values of the volume output fields for a point.

Parameters

[in]	config	- Definition of the particular problem.
[in]	geometry	- Geometrical definition of the problem.
[in]	solver	- The container holding all solution data.
[in]	iPoint	- Index of the point.

Reimplemented from COutput.

SetAdditionalScreenOutput()

void CFlowCompOutput::SetAdditionalScreenOutput ( const CConfig *  config )

overridevirtual

Write any additional output defined for the current solver.

Parameters

[in]

config

- Definition of the particular problem per zone.

Reimplemented from COutput.

SetHistoryOutputFields()

void CFlowCompOutput::SetHistoryOutputFields ( CConfig *  config )

overridevirtual

Set the available history output fields.

Parameters

[in]

config

- Definition of the particular problem.

BEGIN_GROUP: RMS_RES, DESCRIPTION: The root-mean-square residuals of the SOLUTION variables. DESCRIPTION: Root-mean square residual of the density.

DESCRIPTION: Root-mean square residual of the momentum x-component.

DESCRIPTION: Root-mean square residual of the momentum y-component.

DESCRIPTION: Root-mean square residual of the momentum z-component.

DESCRIPTION: Root-mean square residual of the energy.

END_GROUP

BEGIN_GROUP: MAX_RES, DESCRIPTION: The maximum residuals of the SOLUTION variables. DESCRIPTION: Maximum residual of the density.

DESCRIPTION: Maximum residual of the momentum x-component.

DESCRIPTION: Maximum residual of the momentum y-component.

DESCRIPTION: Maximum residual of the momentum z-component.

DESCRIPTION: Maximum residual of the energy.

END_GROUP

BEGIN_GROUP: BGS_RES, DESCRIPTION: The block Gauss Seidel residuals of the SOLUTION variables. DESCRIPTION: Maximum residual of the density.

DESCRIPTION: Maximum residual of the momentum x-component.

DESCRIPTION: Maximum residual of the momentum y-component.

DESCRIPTION: Maximum residual of the momentum z-component.

DESCRIPTION: Maximum residual of the energy.

END_GROUP

BEGIN_GROUP: AEROELASTIC, DESCRIPTION: Aeroelastic plunge, pitch DESCRIPTION: Aeroelastic plunge

DESCRIPTION: Aeroelastic pitch

END_GROUP

DESCRIPTION: Linear solver iterations

BEGIN_GROUP: FIXED_CL, DESCRIPTION: Relevant outputs for the Fixed CL mode

DESCRIPTION: Difference between current and target CL

DESCRIPTION: Angle of attack before the most recent update

DESCRIPTION: Last change in angle of attack by the Fixed CL driver

DESCRIPTION: AOA control command by the CL Driver

END_GROUP

Reimplemented from COutput.

SetInitResiduals()

bool CFlowCompOutput::SetInitResiduals ( const CConfig *  config )

overridevirtual

Check whether the base values for relative residuals should be initialized.

Parameters

[in]

config

- Definition of the particular problem.

Returns

<TRUE> if the residuals should be initialized.

Reimplemented from COutput.

SetTurbomachineryObjectiveFunctions()

void CFlowCompOutput::SetTurbomachineryObjectiveFunctions	(	CSolver *	solver,
		CConfig *	config
	)

SetTurboMultiZonePerformance_Output()

void CFlowCompOutput::SetTurboMultiZonePerformance_Output ( std::shared_ptr< CTurbomachineryStagePerformance >  TurboStagePerf, su2vector< std::shared_ptr< CTurboOutput > >  TurboBladePerfs, CConfig *  config  )

overridevirtual

Sets the multizone turboperformacne screen output.

Parameters

[in]	TurboStagePerf	- Stage turboperformance class
[in]	TurboPerf	- Turboperformance class
[in]	config	- Definition of the particular problem

Reimplemented from COutput.

SetTurboPerformance_Output()

void CFlowCompOutput::SetTurboPerformance_Output ( su2vector< std::shared_ptr< CTurboOutput > >  TurboBladePerfs, CConfig *  config, unsigned long  TimeIter, unsigned long  OuterIter, unsigned long  InnerIter  )

overridevirtual

Sets the turboperformance screen output.

Parameters

[in]	TurboPerf	- Turboperformance class
[in]	config	- Definition of the particular problem
[in]	TimeIter	- Index of the current time-step
[in]	OuterIter	- Index of current outer iteration
[in]	InnerIter	- Index of current inner iteration

Reimplemented from COutput.

SetVolumeOutputFields()

void CFlowCompOutput::SetVolumeOutputFields ( CConfig *  config )

overridevirtual

Set the available volume output fields.

Parameters

[in]

config

- Definition of the particular problem.

Reimplemented from COutput.

WriteHistoryFileOutput()

bool CFlowCompOutput::WriteHistoryFileOutput ( const CConfig *  config )

overridevirtual

Determines if the history file output.

Parameters

[in]

config

- Definition of the particular problem.

Reimplemented from COutput.

WriteTurboSpanwisePerformance()

void CFlowCompOutput::WriteTurboSpanwisePerformance ( su2vector< std::shared_ptr< CTurboOutput > >  TurboBladePerfs, CGeometry *  geometry, CConfig **  config, unsigned short  val_iZone  )

overridevirtual

Write the kinematic and thermodynamic variables at each spanwise division.

Parameters

[in]	TurboPerf	- Turboperformance class
[in]	geometry	- Geometrical definiton of the problem
[in]	config	- Descripiton of the particular problem
[in]	val_iZone	- Idientifier of current zone

Reimplemented from COutput.

---

The documentation for this class was generated from the following files:

• SU2_CFD/include/output/CFlowCompOutput.hpp
• SU2_CFD/src/output/CFlowCompOutput.cpp