CScalarFlux_TransLM< Double, FlowIndices, nDim, nVar > Class Template Reference

Convection and diffusion of the Langtry-Menter transition model, conservative with a diagonal, i/j-symmetric diffusion matrix. The coefficients depend only on the flow's mu/mu_t, not on the transported gamma/Re_theta, so no coefficientJacobians override is needed. More...

#include <trans_edge_flux.hpp>

Inheritance diagram for CScalarFlux_TransLM< Double, FlowIndices, nDim, nVar >:

Public Types
using	Base = CUpwScalarBase< Double, CScalarFlux_TransLM, FlowIndices, nDim, nVar >
using	Int = typename Base::Int
using	Base = CUpwScalarFlux< Double_, Derived, FlowIndices, nDim_, nVar_ >
Public Types inherited from CUpwScalarBase< Double_, Derived, FlowIndices, nDim_, nVar_ >
using	Double = Double_
using	Int = typename CLaneTraits< Double_ >::Int

Public Member Functions
template<class VariableType >
CPair< Vector< Double, nVar > >	coefficients (const FlowIndices &idx, Int iPoint, const EdgeSide< VariableType > &side_i, Int jPoint, const EdgeSide< VariableType > &side_j, const CPair< Double > &) const
	Diffusion coefficients, an i/j average of (mu+mu_t) for intermittency and of 2*(mu+mu_t) for the momentum-thickness Reynolds number; identical for both edge sides.
Public Member Functions inherited from CUpwScalarBase< Double_, Derived, FlowIndices, nDim_, nVar_ >
	CUpwScalarBase (const CConfig &config, size_t nEqn_=nVar_)
	Constructor, inherited by the model with using Base::Base.
template<class VariableType >
EdgeResidual< Double, nVar >	ComputeFlux (const ScalarFluxOptions &opt, Int iPoint, const EdgeSide< VariableType > &side_i, Int jPoint, const EdgeSide< VariableType > &side_j, const Vector< Double, nDim > &normal, const Double &massFlux) const
template<class VariableType >
void	ComputeFlux (const ScalarFluxOptions &opt, Int iEdge, Int iPoint, const EdgeSide< VariableType > &side_i, Int jPoint, const EdgeSide< VariableType > &side_j, const Vector< Double, nDim > &normal, const Double &massFlux, UpdateType updateType, Double updateMask, CSysVector< su2double > &vector, CSysVector< su2double > &vectorDiff, SparseMatrixType &matrix) const
	Compute the flux of an edge and write it to the linear system.

Static Public Attributes
static constexpr bool	Conservative = true
static constexpr bool	DiagonalDiffusion = true
Static Public Attributes inherited from CUpwScalarBase< Double_, Derived, FlowIndices, nDim_, nVar_ >
static constexpr int	nDim = nDim_
static constexpr size_t	nVar = nVar_
static constexpr size_t	Size = EdgeResidual<Double_, nVar_>::Size
	Backing size, for the model to size the containers its coefficients() returns; nVar itself is Dynamic for a runtime model and never usable as a container size.
static constexpr bool	DiffusionReadsDensity = false
	Whether the model's diffusion coefficients read the density, beyond the reading that Conservative already implies. A model that declares neither never gathers it.

Additional Inherited Members
Protected Types inherited from CUpwScalarBase< Double_, Derived, FlowIndices, nDim_, nVar_ >
using	Base = CUpwScalarFlux< Double_, Derived, FlowIndices, nDim_, nVar_ >
Protected Types inherited from CUpwScalarFlux< Double_, Derived, FlowIndices, nDim_, nVar_ >
using	Int = typename CLaneTraits< Double_ >::Int
Protected Types inherited from CAvgGradScalarBase< Double, Derived, FlowIndices, nDim, nVar >
using	Int = typename CLaneTraits< Double >::Int
Protected Member Functions inherited from CUpwScalarFlux< Double_, Derived, FlowIndices, nDim_, nVar_ >
	CUpwScalarFlux (const CConfig &)
void	finalizeFlux (const FlowIndices &, const ScalarFluxOptions &opt, Int, const EdgeSide< VariableType > &, Int, const EdgeSide< VariableType > &, const Double_ &a0, const Double_ &a1, const CPair< Double_ > &rho, const CPair< CScalarValues< Double_, Size > > &phi, EdgeResidual< Double_, nVar > &res) const
	Upwind convection of the transported variable, weighted by the density for a conservative model.
Protected Member Functions inherited from CAvgGradScalarBase< Double, Derived, FlowIndices, nDim, nVar >
template<class VariableType >
void	diffusionTerms (const FlowIndices &idx, const ScalarFluxOptions &opt, Int iPoint, const EdgeSide< VariableType > &side_i, Int jPoint, const EdgeSide< VariableType > &side_j, const CPair< Double > &rho, const Vector< Double, nDim > &normal, const Vector< Double, nDim > &vector_ij, EdgeResidual< Double, nVar > &res) const
template<class... Ts>
void	coefficientJacobians (Ts &&...) const
	Contribution of the derivatives of the coefficients themselves.
template<class... Ts>
void	extraDiffusionTerms (Ts &&...) const
	Diffusion of a model that transports more than one gradient, of states it synthesises from its own containers.
Protected Attributes inherited from CUpwScalarBase< Double_, Derived, FlowIndices, nDim_, nVar_ >
const FlowIndices	idx
const size_t	nEqn
	Equations of the model, which a dynamic one gives to its base.
const su2double	kappa
	MUSCL reconstruction parameters, read from CConfig once per construction (i.e. once per nonlinear iteration, see CScalarSolver::EdgeFluxResidual) instead of per edge; this is also where the scalar limiter's freezing (GetLimiterIter) is resolved, by collapsing its type to NONE once frozen. The flow limiter is not frozen this way: once the flow solver stops recomputing it, it keeps applying the last values it has.
const su2double	umusclRamp
const su2double	kappaFlow
const LIMITER	limiterType
const LIMITER	limiterTypeFlow
const bool	musclFlow

Detailed Description

template<class Double, class FlowIndices, int nDim, size_t nVar = 2>
class CScalarFlux_TransLM< Double, FlowIndices, nDim, nVar >

Convection and diffusion of the Langtry-Menter transition model, conservative with a diagonal, i/j-symmetric diffusion matrix. The coefficients depend only on the flow's mu/mu_t, not on the transported gamma/Re_theta, so no coefficientJacobians override is needed.

Note

LM writes no finalizeFlux of its own: the inherited CUpwScalarFlux one is exactly flux(iVar) = a0*rho_i*phi_i(iVar) + a1*rho_j*phi_j(iVar), Conservative weighting by density, which is the model's whole convective term.

Member Typedef Documentation

Base [1/2]

template<class Double , class FlowIndices , int nDim, size_t nVar = 2>

using CScalarFlux_TransLM< Double, FlowIndices, nDim, nVar >::Base = CUpwScalarBase<Double, CScalarFlux_TransLM, FlowIndices, nDim, nVar>

Base [2/2]

template<class Double , class FlowIndices , int nDim, size_t nVar = 2>

using CUpwScalarBase< Double_, Derived, FlowIndices, nDim_, nVar_ >::Base = CUpwScalarFlux<Double_, Derived, FlowIndices, nDim_, nVar_>

Int

template<class Double , class FlowIndices , int nDim, size_t nVar = 2>

using CScalarFlux_TransLM< Double, FlowIndices, nDim, nVar >::Int = typename Base::Int

Member Function Documentation

coefficients()

template<class Double , class FlowIndices , int nDim, size_t nVar = 2>

template<class VariableType >

CPair< Vector< Double, nVar > > CScalarFlux_TransLM< Double, FlowIndices, nDim, nVar >::coefficients ( const FlowIndices &  idx, Int  iPoint, const EdgeSide< VariableType > &  side_i, Int  jPoint, const EdgeSide< VariableType > &  side_j, const CPair< Double > &    ) const

inline

Diffusion coefficients, an i/j average of (mu+mu_t) for intermittency and of 2*(mu+mu_t) for the momentum-thickness Reynolds number; identical for both edge sides.

Member Data Documentation

Conservative

template<class Double , class FlowIndices , int nDim, size_t nVar = 2>

constexpr bool CScalarFlux_TransLM< Double, FlowIndices, nDim, nVar >::Conservative = true

staticconstexpr

DiagonalDiffusion

template<class Double , class FlowIndices , int nDim, size_t nVar = 2>

constexpr bool CScalarFlux_TransLM< Double, FlowIndices, nDim, nVar >::DiagonalDiffusion = true

staticconstexpr

---

The documentation for this class was generated from the following file:

• SU2_CFD/include/numerics/turbulent/transition/trans_edge_flux.hpp