Class for reading a defining the primal grid which is read from the grid file in .su2 or .cgns format.
More...
|
| | CPhysicalGeometry (void) |
| | Constructor of the class.
|
| |
| | CPhysicalGeometry (CConfig *config, unsigned short val_iZone, unsigned short val_nZone) |
| | Reads the geometry of the grid and adjust the boundary conditions with the configuration file.
|
| |
| | CPhysicalGeometry (CGeometry *geometry, CConfig *config) |
| | Accepts a geometry container holding a linearly partitioned grid with coloring performed by ParMETIS, and this routine distributes the points and cells to all partitions based on the coloring.
|
| |
| | CPhysicalGeometry (CGeometry *geometry, CConfig *config, bool val_flag) |
| | Accepts a geometry container holding a linearly partitioned grid with coloring performed by ParMETIS, and this routine distributes the points and cells to all partitions based on the coloring.
|
| |
| | ~CPhysicalGeometry (void) override |
| | Destructor of the class.
|
| |
| void | DistributeColoring (const CConfig *config, CGeometry *geometry) |
| | Distributes the coloring from ParMETIS so that each rank has complete information about the local grid points.
|
| |
| void | DistributePoints (const CConfig *config, CGeometry *geometry) |
| | Distribute the grid points, including ghost points, across all ranks based on a ParMETIS coloring.
|
| |
| void | DistributeVolumeConnectivity (const CConfig *config, CGeometry *geometry, unsigned short Elem_Type) |
| | Distribute the connectivity for a single volume element type across all ranks based on a ParMETIS coloring.
|
| |
| void | DistributeSurfaceConnectivity (CConfig *config, CGeometry *geometry, unsigned short Elem_Type) |
| | Distribute the connectivity for a single surface element type in all markers across all ranks based on a ParMETIS coloring.
|
| |
| void | DistributeMarkerTags (CConfig *config, CGeometry *geometry) |
| | Broadcast the marker tags for all boundaries from the master rank to all other ranks.
|
| |
| void | PartitionSurfaceConnectivity (CConfig *config, CGeometry *geometry, unsigned short Elem_Type) |
| | Partition the marker connectivity held on the master rank according to a linear partitioning.
|
| |
| void | LoadPoints (CConfig *config, CGeometry *geometry) |
| | Load the local grid points after partitioning (owned and ghost) into the geometry class objects.
|
| |
| void | LoadVolumeElements (CConfig *config, CGeometry *geometry) |
| | Load the local volume elements after partitioning (owned and ghost) into the geometry class objects.
|
| |
| void | LoadSurfaceElements (CConfig *config, CGeometry *geometry) |
| | Load the local surface elements after partitioning (owned and ghost) into the geometry class objects.
|
| |
| void | InitiateCommsAll (void *bufSend, const int *nElemSend, SU2_MPI::Request *sendReq, void *bufRecv, const int *nElemRecv, SU2_MPI::Request *recvReq, unsigned short countPerElem, COMM_TYPE commType) |
| | Routine to launch non-blocking sends and recvs amongst all processors.
|
| |
| void | CompleteCommsAll (int nSends, SU2_MPI::Request *sendReq, int nRecvs, SU2_MPI::Request *recvReq) |
| | Routine to complete the set of non-blocking communications launched with InitiateComms() with MPI_Waitany().
|
| |
| void | PrepareOffsets (unsigned long val_npoint_global) |
| | Routine to compute the initial linear partitioning offset counts and store in persistent data structures.
|
| |
| unsigned long | GetLinearPartition (unsigned long val_global_index) |
| | Get the processor that owns the global numbering index based on the linear partitioning.
|
| |
| void | SortAdjacency (const CConfig *config) |
| | Routine to sort the adjacency for ParMETIS for graph partitioning in parallel.
|
| |
| void | SetSendReceive (const CConfig *config) override |
| | Set the send receive boundaries of the grid.
|
| |
| void | SetBoundaries (CConfig *config) override |
| | Set the send receive boundaries of the grid.
|
| |
| void | SetGlobal_to_Local_Point () override |
| | Set the local index that correspond with the global numbering index.
|
| |
| long | GetGlobal_to_Local_Point (unsigned long val_ipoint) const override |
| | Get the local index that correspond with the global numbering index.
|
| |
| void | Read_Mesh (CConfig *config, const string &val_mesh_filename, unsigned short val_iZone, unsigned short val_nZone) |
| | Reads the geometry of the grid and adjust the boundary conditions with the configuration file in parallel (for parmetis).
|
| |
| void | LoadLinearlyPartitionedPoints (CConfig *config, CMeshReaderBase *mesh) |
| | Routine to load the CGNS grid points from a single zone into the proper SU2 data structures.
|
| |
| void | LoadLinearlyPartitionedPointsFEM (CConfig *config, CMeshReaderBase *mesh) |
| | Routine to load the grid points from a single zone into the proper SU2 data structures for the FEM solver.
|
| |
| void | LoadLinearlyPartitionedVolumeElements (CConfig *config, CMeshReaderBase *mesh) |
| | Loads the interior volume elements from the mesh reader object into the primal element data structures.
|
| |
| void | LoadLinearlyPartitionedVolumeElementsFEM (CConfig *config, CMeshReaderBase *mesh) |
| | Loads the interior volume elements from the mesh reader object into the primal element data structures for the FEM solver.
|
| |
| void | LoadUnpartitionedSurfaceElements (CConfig *config, CMeshReaderBase *mesh) |
| | Loads the boundary elements (markers) from the mesh reader object into the primal element data structures.
|
| |
| void | LoadLinearlyPartitionedSurfaceElementsFEM (CConfig *config, CMeshReaderBase *mesh) |
| | Loads the boundary elements (markers) from the mesh reader object into the primal element data structures for the FEM solver.
|
| |
| void | PrepareAdjacency (const CConfig *config) |
| | Prepares the grid point adjacency based on a linearly partitioned mesh object needed by ParMETIS for graph partitioning in parallel.
|
| |
| bool | FindFace (unsigned long first_elem, unsigned long second_elem, unsigned short &face_first_elem, unsigned short &face_second_elem) override |
| | Find repeated nodes between two elements to identify the common face.
|
| |
| void | SetPositive_ZArea (CConfig *config) override |
| | Compute surface area (positive z-direction) for force coefficient non-dimensionalization.
|
| |
| void | SetPoint_Connectivity () override |
| | Set points which surround a point.
|
| |
| void | SetRCM_Ordering (CConfig *config) override |
| | Set a renumbering using a Reverse Cuthill-McKee Algorithm.
|
| |
| void | SetElement_Connectivity (void) override |
| | Set elements which surround an element.
|
| |
| void | SetBoundVolume (void) override |
| | Set the volume element associated to each boundary element.
|
| |
| void | SetVertex (const CConfig *config) override |
| | Set boundary vertex.
|
| |
| void | ComputeNSpan (CConfig *config, unsigned short val_iZone, unsigned short marker_flag, bool allocate) override |
| | Set number of span wise level for turbomachinery computation.
|
| |
| void | SetTurboVertex (CConfig *config, unsigned short val_iZone, unsigned short marker_flag, bool allocate) override |
| | Set turbo boundary vertex.
|
| |
| void | UpdateTurboVertex (CConfig *config, unsigned short val_iZone, unsigned short marker_flag) override |
| | update turbo boundary vertex.
|
| |
| void | SetAvgTurboValue (CConfig *config, unsigned short val_iZone, unsigned short marker_flag, bool allocate) override |
| | Set turbo boundary vertex.
|
| |
| void | GatherInOutAverageValues (CConfig *config, bool allocate) override |
| | Set turbo boundary vertex.
|
| |
| void | SetAvgTurboGeoValues (const CConfig *donor_config, CGeometry *donor_geometry, unsigned short donorZone) override |
| | Store all the turboperformance in the solver in ZONE_0.
|
| |
| void | SetControlVolume (CConfig *config, unsigned short action) override |
| | Set the edge structure of the control volume.
|
| |
| void | VisualizeControlVolume (const CConfig *config) const override |
| | Visualize the structure of the control volume(s).
|
| |
| void | MatchActuator_Disk (const CConfig *config) override |
| | Mach the near field boundary condition.
|
| |
| void | SetBoundControlVolume (const CConfig *config, unsigned short action) override |
| | Set boundary vertex structure of the control volume.
|
| |
| void | SetMaxLength (CConfig *config) override |
| | Set the maximum cell-center to cell-center distance for CVs.
|
| |
| void | SetTecPlot (char config_filename[MAX_STRING_SIZE], bool new_file) override |
| | Set the Tecplot file.
|
| |
| void | SetBoundTecPlot (char mesh_filename[MAX_STRING_SIZE], bool new_file, CConfig *config) override |
| | Set the output file for boundaries in Tecplot.
|
| |
| void | Check_IntElem_Orientation (const CConfig *config) override |
| | Check the volume element orientation.
|
| |
| void | Check_BoundElem_Orientation (const CConfig *config) override |
| | Check the volume element orientation.
|
| |
| void | SetColorGrid_Parallel (const CConfig *config) override |
| | Set the domains for grid grid partitioning using ParMETIS.
|
| |
| void | SetColorFEMGrid_Parallel (CConfig *config) override |
| | Set the domains for FEM grid partitioning using ParMETIS.
|
| |
| void | DetermineDonorElementsWallFunctions (CConfig *config) |
| | Determine the donor elements for the boundary elements on viscous wall boundaries when wall functions are used.
|
| |
| void | DetermineFEMConstantJacobiansAndLenScale (CConfig *config) |
| | Determine whether or not the Jacobians of the elements and faces are constant and a length scale of the elements.
|
| |
| void | DetermineFEMGraphWeights (CConfig *config, const vector< CFaceOfElement > &localFaces, const vector< vector< unsigned long > > &adjacency, const map< unsigned long, CUnsignedShort2T > &mapExternalElemIDToTimeLevel, vector< passivedouble > &vwgt, vector< vector< passivedouble > > &adjwgt) |
| | Compute the weights of the FEM graph for ParMETIS.
|
| |
| void | DetermineGraphAdjacency (const vector< CFaceOfElement > &localFaces, vector< vector< unsigned long > > &adjacency) |
| | Function, which determines the adjacency information of the graph representation of the grid.
|
| |
| void | DetermineMatchingFacesFEMGrid (const CConfig *config, vector< CFaceOfElement > &localFaces) |
| | Function, which determines the matching faces of a FEM grid.
|
| |
| void | DetermineNonMatchingFacesFEMGrid (const CConfig *config, vector< CFaceOfElement > &localMatchingFaces) |
| | Function, which determines the non-matching faces of a FEM grid.
|
| |
| void | DetermineOwnershipInternalFaces (vector< CFaceOfElement > &localFaces, map< unsigned long, CUnsignedShort2T > &mapExternalElemIDToTimeLevel) |
| | Function, which determines the owner of the internal faces, i.e. which element is responsible for computing the fluxes through the face.
|
| |
| void | DeterminePeriodicFacesFEMGrid (CConfig *config, vector< CFaceOfElement > &localFaces) |
| | Determine the neighboring information for periodic faces of a FEM grid.
|
| |
| void | DetermineTimeLevelElements (CConfig *config, const vector< CFaceOfElement > &localFaces, map< unsigned long, CUnsignedShort2T > &mapExternalElemIDToTimeLevel) |
| | Determine the time level of the elements when time accurate local time stepping is employed.
|
| |
| void | StoreFaceInfoInLocalElements (const vector< CFaceOfElement > &localFaces) |
| | Function, which stores the information of the local matching faces in the data structures of the local elements.
|
| |
| void | ComputeMeshQualityStatistics (const CConfig *config) override |
| | Compute 3 grid quality metrics: orthogonality angle, dual cell aspect ratio, and dual cell volume ratio.
|
| |
| void | FindNormal_Neighbor (const CConfig *config) override |
| | Find and store the closest, most normal, neighbor to a vertex.
|
| |
| void | SetBoundSensitivity (CConfig *config) override |
| | Read the sensitivity from an input file.
|
| |
| su2double | Compute_MaxThickness (su2double *Plane_P0, su2double *Plane_Normal, CConfig *config, vector< su2double > &Xcoord_Airfoil, vector< su2double > &Ycoord_Airfoil, vector< su2double > &Zcoord_Airfoil) override |
| | Compute the maximum thickness of an airfoil.
|
| |
| su2double | Compute_Twist (su2double *Plane_P0, su2double *Plane_Normal, vector< su2double > &Xcoord_Airfoil, vector< su2double > &Ycoord_Airfoil, vector< su2double > &Zcoord_Airfoil) override |
| | Compute the twist of an airfoil.
|
| |
| void | Compute_Wing_LeadingTrailing (su2double *LeadingEdge, su2double *TrailingEdge, su2double *Plane_P0, su2double *Plane_Normal, vector< su2double > &Xcoord_Airfoil, vector< su2double > &Ycoord_Airfoil, vector< su2double > &Zcoord_Airfoil) override |
| | Compute the leading/trailing edge location of an airfoil.
|
| |
| void | Compute_Fuselage_LeadingTrailing (su2double *LeadingEdge, su2double *TrailingEdge, su2double *Plane_P0, su2double *Plane_Normal, vector< su2double > &Xcoord_Airfoil, vector< su2double > &Ycoord_Airfoil, vector< su2double > &Zcoord_Airfoil) override |
| | Compute the leading/trailing edge location of a fuselage.
|
| |
| su2double | Compute_Chord (su2double *Plane_P0, su2double *Plane_Normal, vector< su2double > &Xcoord_Airfoil, vector< su2double > &Ycoord_Airfoil, vector< su2double > &Zcoord_Airfoil) override |
| | Compute the chord of an airfoil.
|
| |
| su2double | Compute_Width (su2double *Plane_P0, su2double *Plane_Normal, vector< su2double > &Xcoord_Airfoil, vector< su2double > &Ycoord_Airfoil, vector< su2double > &Zcoord_Airfoil) override |
| | Compute the chord of an airfoil.
|
| |
| su2double | Compute_WaterLineWidth (su2double *Plane_P0, su2double *Plane_Normal, CConfig *config, vector< su2double > &Xcoord_Airfoil, vector< su2double > &Ycoord_Airfoil, vector< su2double > &Zcoord_Airfoil) override |
| | Compute the chord of an airfoil.
|
| |
| su2double | Compute_Height (su2double *Plane_P0, su2double *Plane_Normal, vector< su2double > &Xcoord_Airfoil, vector< su2double > &Ycoord_Airfoil, vector< su2double > &Zcoord_Airfoil) override |
| | Compute the chord of an airfoil.
|
| |
| su2double | Compute_LERadius (su2double *Plane_P0, su2double *Plane_Normal, vector< su2double > &Xcoord_Airfoil, vector< su2double > &Ycoord_Airfoil, vector< su2double > &Zcoord_Airfoil) override |
| | Compute the chord of an airfoil.
|
| |
| su2double | Compute_Thickness (su2double *Plane_P0, su2double *Plane_Normal, su2double Location, CConfig *config, vector< su2double > &Xcoord_Airfoil, vector< su2double > &Ycoord_Airfoil, vector< su2double > &Zcoord_Airfoil, su2double &ZLoc) override |
| | Compute the thickness of an airfoil.
|
| |
| su2double | Compute_Area (su2double *Plane_P0, su2double *Plane_Normal, CConfig *config, vector< su2double > &Xcoord_Airfoil, vector< su2double > &Ycoord_Airfoil, vector< su2double > &Zcoord_Airfoil) override |
| | Compute the area of an airfoil.
|
| |
| su2double | Compute_Length (su2double *Plane_P0, su2double *Plane_Normal, CConfig *config, vector< su2double > &Xcoord_Airfoil, vector< su2double > &Ycoord_Airfoil, vector< su2double > &Zcoord_Airfoil) override |
| | Compute the length of an airfoil.
|
| |
| su2double | Compute_Dihedral (su2double *LeadingEdge_im1, su2double *TrailingEdge_im1, su2double *LeadingEdge_i, su2double *TrailingEdge_i) override |
| | Compute the dihedral of a wing.
|
| |
| su2double | Compute_Curvature (su2double *LeadingEdge_im1, su2double *TrailingEdge_im1, su2double *LeadingEdge_i, su2double *TrailingEdge_i, su2double *LeadingEdge_ip1, su2double *TrailingEdge_ip1) override |
| | Compute the curvature of a wing.
|
| |
| void | Compute_Wing (CConfig *config, bool original_surface, su2double &Wing_Volume, su2double &Wing_MinMaxThickness, su2double &Wing_MaxMaxThickness, su2double &Wing_MinChord, su2double &Wing_MaxChord, su2double &Wing_MinLERadius, su2double &Wing_MaxLERadius, su2double &Wing_MinToC, su2double &Wing_MaxToC, su2double &Wing_ObjFun_MinToC, su2double &Wing_MaxTwist, su2double &Wing_MaxCurvature, su2double &Wing_MaxDihedral) override |
| | Evaluate geometrical parameters of a wing.
|
| |
| void | Compute_Fuselage (CConfig *config, bool original_surface, su2double &Fuselage_Volume, su2double &Fuselage_WettedArea, su2double &Fuselage_MinWidth, su2double &Fuselage_MaxWidth, su2double &Fuselage_MinWaterLineWidth, su2double &Fuselage_MaxWaterLineWidth, su2double &Fuselage_MinHeight, su2double &Fuselage_MaxHeight, su2double &Fuselage_MaxCurvature) override |
| | Evaluate geometrical parameters of a wing.
|
| |
| void | Compute_Nacelle (CConfig *config, bool original_surface, su2double &Nacelle_Volume, su2double &Nacelle_MinMaxThickness, su2double &Nacelle_MaxMaxThickness, su2double &Nacelle_MinChord, su2double &Nacelle_MaxChord, su2double &Nacelle_MinLERadius, su2double &Nacelle_MaxLERadius, su2double &Nacelle_MinToC, su2double &Nacelle_MaxToC, su2double &Nacelle_ObjFun_MinToC, su2double &Nacelle_MaxTwist) override |
| | Evaluate geometrical parameters of a wing.
|
| |
| void | SetSensitivity (CConfig *config) override |
| | Read the sensitivity from adjoint solution file and store it.
|
| |
| void | ReadUnorderedSensitivity (CConfig *config) override |
| | Read the sensitivity from unordered ASCII adjoint solution file and store it.
|
| |
| su2double | GetSensitivity (unsigned long iPoint, unsigned short iDim) const override |
| | Get the Sensitivity at a specific point.
|
| |
| void | SetSensitivity (unsigned long iPoint, unsigned short iDim, su2double val) override |
| | Set the Sensitivity at a specific point.
|
| |
| std::unique_ptr< CADTElemClass > | ComputeViscousWallADT (const CConfig *config) const override |
| | Compute an ADT including the coordinates of all viscous markers.
|
| |
| void | SetWallDistance (CADTElemClass *WallADT, const CConfig *config, unsigned short iZone) override |
| | Reduce the wall distance based on an previously constructed ADT.
|
| |
| void | SetWallDistance (su2double val) override |
| | Set wall distances a specific value.
|
| |
| void | FindUniqueNode_PeriodicBound (const CConfig *config) final |
| | For streamwise periodicity, find & store a unique reference node on the designated periodic inlet.
|
| |
| const su2double * | GetStreamwise_Periodic_RefNode (void) const final |
| | Get a pointer to the reference node coordinate vector.
|
| |
| virtual void | SetBoundControlVolume (const CConfig *config, unsigned short action) |
| | A virtual member.
|
| |
| virtual void | SetBoundControlVolume (const CGeometry *fine_grid, const CConfig *config, unsigned short action) |
| | A virtual member.
|
| |
| virtual void | SetControlVolume (CConfig *config, unsigned short action) |
| | Sets control volume.
|
| |
| virtual void | SetControlVolume (const CGeometry *fine_grid, unsigned short action) |
| | A virtual member.
|
| |
| virtual void | SetPoint_Connectivity () |
| | Set connectivity between points.
|
| |
| virtual void | SetPoint_Connectivity (const CGeometry *fine_grid) |
| | A virtual member.
|
| |
| virtual void | SetVertex (const CConfig *config) |
| | Sets the vertices.
|
| |
| virtual void | SetVertex (const CGeometry *fine_grid, const CConfig *config) |
| | A virtual member.
|
| |
| | CGeometry () |
| | Constructor of the class.
|
| |
| | CGeometry (CConfig *config, unsigned short nDim) |
| | Constructor of the class.
|
| |
| virtual | ~CGeometry () |
| | Destructor of the class.
|
| |
| void | PreprocessP2PComms (CGeometry *geometry, CConfig *config) |
| | Routine to launch non-blocking recvs only for all periodic communications.
|
| |
| void | AllocateP2PComms (unsigned short val_countPerPoint) |
| | Routine to allocate buffers for point-to-point MPI communications. Also called to dynamically reallocate if not enough memory is found for comms during runtime.
|
| |
| void | PostP2PRecvs (CGeometry *geometry, const CConfig *config, COMM_TYPE commType, unsigned short countPerPoint, bool val_reverse) const |
| | Routine to launch non-blocking recvs only for all point-to-point communication with neighboring partitions.
|
| |
| void | PostP2PSends (CGeometry *geometry, const CConfig *config, COMM_TYPE commType, unsigned short countPerPoint, int val_iMessage, bool val_reverse) const |
| | Routine to launch a single non-blocking send once the buffer is loaded for a point-to-point commucation.
|
| |
| template<class T > |
| COMM_TYPE | GetCommType () const |
| | Returns the COMM_TYPE enum for a given data type.
|
| |
| template<class T > |
| auto * | GetP2PSendBuf () const |
| | Returns the send buffer for a given data type.
|
| |
| template<class T > |
| auto * | GetP2PRecvBuf () const |
| | Returns the receive buffer for a given data type.
|
| |
| template<class T > |
| auto * | GetP2PSendReq () const |
| | Returns the send requests for a given data type.
|
| |
| template<class T > |
| auto * | GetP2PRecvReq () const |
| | Returns the receive requests for a given data type.
|
| |
| void | PreprocessPeriodicComms (CGeometry *geometry, CConfig *config) |
| | Routine to set up persistent data structures for periodic communications.
|
| |
| void | AllocatePeriodicComms (unsigned short val_countPerPeriodicPoint) |
| | Routine to allocate buffers for periodic communications. Also called to dynamically reallocate if not enough memory is found for comms during runtime.
|
| |
| void | PostPeriodicRecvs (CGeometry *geometry, const CConfig *config, COMM_TYPE commType, unsigned short countPerPeriodicPoint) |
| | Routine to launch non-blocking recvs only for all periodic communication with neighboring partitions.
|
| |
| void | PostPeriodicSends (CGeometry *geometry, const CConfig *config, COMM_TYPE commType, unsigned short countPerPeriodicPoint, int val_iMessage) const |
| | Routine to launch a single non-blocking send once the buffer is loaded for a periodic commucation.
|
| |
| void | GetCommCountAndType (const CConfig *config, MPI_QUANTITIES commType, unsigned short &COUNT_PER_POINT, COMM_TYPE &MPI_TYPE) const |
| | Helper function to define the type and number of variables per point for each communication type.
|
| |
| void | InitiateComms (CGeometry *geometry, const CConfig *config, MPI_QUANTITIES commType) const |
| | Routine to load a geometric quantity into the data structures for MPI point-to-point communication and to launch non-blocking sends and recvs for all point-to-point communication with neighboring partitions.
|
| |
| void | CompleteComms (CGeometry *geometry, const CConfig *config, MPI_QUANTITIES commType) |
| | Routine to complete the set of non-blocking communications launched by InitiateComms() and unpacking of the data into the geometry class.
|
| |
| unsigned short | GetnDim () const |
| | Get number of coordinates.
|
| |
| unsigned short | GetnZone () const |
| | Get number of zones.
|
| |
| unsigned long | GetnPoint () const |
| | Get number of points.
|
| |
| unsigned long | GetnPointDomain () const |
| | Get number of real points (that belong to the domain).
|
| |
| unsigned long | GetGlobal_nPoint () const |
| | Retrieve total number of nodes in a simulation across all processors (including halos).
|
| |
| unsigned long | GetGlobal_nPointDomain () const |
| | Retrieve total number of nodes in a simulation across all processors (excluding halos).
|
| |
| unsigned long | GetnElem () const |
| | Get number of elements.
|
| |
| unsigned long | GetnEdge () const |
| | Get number of edges.
|
| |
| unsigned short | GetnMarker () const |
| | Get number of markers.
|
| |
| const su2double * | GetSpanWiseValue (unsigned short val_marker) const |
| | Get number of vertices.
|
| |
| unsigned long | GetnVertex (unsigned short val_marker) const |
| | Get number of vertices.
|
| |
| unsigned short | GetnSpanWiseSections (unsigned short marker_flag) const |
| | Get number of span wise section.
|
| |
| unsigned long | GetnVertexSpan (unsigned short val_marker, unsigned short val_span) const |
| | Get number of vertices.
|
| |
| unsigned long | GetnFreqSpan (unsigned short val_marker, unsigned short val_span) const |
| | Get number of frequencies per span for NRBC.
|
| |
| unsigned long | GetnVertexSpanMax (unsigned short marker_flag) const |
| | Get number of vertices.
|
| |
| unsigned long | GetnFreqSpanMax (unsigned short marker_flag) const |
| | Get number of max frequencies for initializing the Fourier Coefficient for NR BC.
|
| |
| void | SetnVertexSpanMax (unsigned short marker_flag, unsigned long nVertMax) |
| | Get number of vertices.
|
| |
| long | FindEdge (unsigned long first_point, unsigned long second_point, bool error=true) const |
| | Get the edge index from using the nodes of the edge.
|
| |
| bool | CheckEdge (unsigned long first_point, unsigned long second_point) const |
| | Get the edge index from using the nodes of the edge.
|
| |
| void | TestGeometry () const |
| | Create a file for testing the geometry.
|
| |
| void | SetnMarker (unsigned short val_nmarker) |
| | A virtual member.
|
| |
| void | SetnDim (unsigned short val_nDim) |
| | Set the number of dimensions of the problem.
|
| |
| string | GetMarker_Tag (unsigned short val_marker) const |
| | Get the index of a marker.
|
| |
| void | SetMarker_Tag (unsigned short val_marker, string val_index) |
| | Set index of a marker.
|
| |
| void | SetnElem_Bound (unsigned short val_marker, unsigned long val_nelem_bound) |
| | Set the number of boundary elements.
|
| |
| void | SetnPoint (unsigned long val_npoint) |
| | Set the number of grid points.
|
| |
| void | SetnPointDomain (unsigned long val_npoint) |
| | Set the number of grid points in the domain.
|
| |
| void | SetGlobal_nPointDomain (unsigned long val_global_npoint) |
| | Set the value of the total number of points globally in the simulation.
|
| |
| void | SetnElem (unsigned long val_nelem) |
| | Set the number of grid elements.
|
| |
| unsigned long | GetnElem_Bound (unsigned short val_marker) const |
| | Get the number of boundary elements.
|
| |
| unsigned long | GetMax_GlobalPoint () const |
| | Get the number of elements in vtk fortmat.
|
| |
| void | SetEdges () |
| | Sets the edges of an elemment.
|
| |
| void | SetFaces () |
| | Sets the faces of an element..
|
| |
| virtual void | MatchPeriodic (const CConfig *config, unsigned short val_periodic) |
| | Match periodic boundary points using coordinate-based matching.
|
| |
| void | ComputeModifiedSymmetryNormals (const CConfig *config) |
| | Computes modified normals at intersecting symmetry planes.
|
| |
| virtual void | SetColorGrid (CConfig *config) |
| | A virtual member.
|
| |
| virtual void | DivideConnectivity (CConfig *config, unsigned short Elem_Type) |
| | A virtual member.
|
| |
| virtual void | SetCoord (const CGeometry *fine_grid) |
| | A virtual member.
|
| |
| virtual void | SetMultiGridWallHeatFlux (const CGeometry *fine_grid, unsigned short val_marker) |
| | A virtual member.
|
| |
| virtual void | SetMultiGridWallTemperature (const CGeometry *fine_grid, unsigned short val_marker) |
| | A virtual member.
|
| |
| void | SetCustomBoundary (CConfig *config) |
| | Set the data containers for customized boundary conditions.
|
| |
| void | SetVelocity (CConfig *config, bool print) |
| | General interface for setting the velocity in the geometry during motion ramps.
|
| |
| void | SetRotationalVelocity (const CConfig *config, bool print=false) |
| | Set cartesian grid velocity based on rotational speed and axis.
|
| |
| void | SetShroudVelocity (const CConfig *config) |
| | Set the rotational velocity of the points on the shroud markers to 0.
|
| |
| void | SetTranslationalVelocity (const CConfig *config, bool print=false) |
| | Set the translational velocity at each node.
|
| |
| void | SetWallVelocity (const CConfig *config, bool print=false) |
| | Set the translational/rotational velocity for all moving walls.
|
| |
| void | SetGridVelocity (const CConfig *config) |
| | Set the grid velocity via finite differencing at each node.
|
| |
| virtual void | SetRestricted_GridVelocity (const CGeometry *fine_grid) |
| | A virtual member.
|
| |
| void | ComputeSurfaceAreaCfgFile (const CConfig *config) |
| | Compute the surface area of all global markers.
|
| |
| su2double | GetSurfaceArea (const CConfig *config, unsigned short val_marker) const |
| | Get global Surface Area to a local marker.
|
| |
| void | ComputeSurfStraightness (const CConfig *config, bool print_on_screen) |
| | Check if a boundary is straight(2D) / plane(3D) for EULER_WALL and SYMMETRY_PLANE only and store the information in boundIsStraight. For all other boundary types this will return false and could therfore be wrong. Used ultimately for BC_Slip_Wall.
|
| |
| void | ComputeSurf_Curvature (CConfig *config) |
| | Find and store all vertices on a sharp corner in the geometry.
|
| |
| void | ComputeAirfoil_Section (su2double *Plane_P0, su2double *Plane_Normal, su2double MinXCoord, su2double MaxXCoord, su2double MinYCoord, su2double MaxYCoord, su2double MinZCoord, su2double MaxZCoord, const su2double *FlowVariable, vector< su2double > &Xcoord_Airfoil, vector< su2double > &Ycoord_Airfoil, vector< su2double > &Zcoord_Airfoil, vector< su2double > &Variable_Airfoil, bool original_surface, CConfig *config) |
| | A virtual member.
|
| |
| unsigned long | GetGlobal_nElem () const |
| | Retrieve total number of elements in a simulation across all processors.
|
| |
| unsigned long | GetGlobal_nElemDomain () const |
| | Retrieve total number of elements in a simulation across all processors (excluding halos).
|
| |
| unsigned long | GetGlobal_nElemLine () const |
| | Retrieve total number of triangular elements in a simulation across all processors.
|
| |
| unsigned long | GetGlobal_nElemTria () const |
| | Retrieve total number of triangular elements in a simulation across all processors.
|
| |
| unsigned long | GetGlobal_nElemQuad () const |
| | Retrieve total number of quadrilateral elements in a simulation across all processors.
|
| |
| unsigned long | GetGlobal_nElemTetr () const |
| | Retrieve total number of tetrahedral elements in a simulation across all processors.
|
| |
| unsigned long | GetGlobal_nElemHexa () const |
| | Retrieve total number of hexahedral elements in a simulation across all processors.
|
| |
| unsigned long | GetGlobal_nElemPris () const |
| | Retrieve total number of prism elements in a simulation across all processors.
|
| |
| unsigned long | GetGlobal_nElemPyra () const |
| | Retrieve total number of pyramid elements in a simulation across all processors.
|
| |
| unsigned long | GetnElemLine () const |
| | Get number of triangular elements.
|
| |
| unsigned long | GetnElemTria () const |
| | Get number of triangular elements.
|
| |
| unsigned long | GetnElemQuad () const |
| | Get number of quadrilateral elements.
|
| |
| unsigned long | GetnElemTetr () const |
| | Get number of tetrahedral elements.
|
| |
| unsigned long | GetnElemHexa () const |
| | Get number of hexahedral elements.
|
| |
| unsigned long | GetnElemPris () const |
| | Get number of prism elements.
|
| |
| unsigned long | GetnElemPyra () const |
| | Get number of pyramid elements.
|
| |
| vector< vector< su2double > > | GetXCoord () const |
| | Get x coords of geometrical planes in the mesh.
|
| |
| vector< vector< su2double > > | GetYCoord () const |
| | Get y coords of geometrical planes in the mesh.
|
| |
| vector< vector< su2double > > | GetZCoord () const |
| | Get z coords of geometrical planes in the mesh.
|
| |
| vector< vector< unsigned long > > | GetPlanarPoints () const |
| | Get all points on a geometrical plane in the mesh.
|
| |
| bool | SegmentIntersectsPlane (const su2double *Segment_P0, const su2double *Segment_P1, su2double Variable_P0, su2double Variable_P1, const su2double *Plane_P0, const su2double *Plane_Normal, su2double *Intersection, su2double &Variable_Interp) |
| | Compute the intersection between a segment and a plane.
|
| |
| bool | RayIntersectsTriangle (const su2double orig[3], const su2double dir[3], const su2double vert0[3], const su2double vert1[3], const su2double vert2[3], su2double *intersect) |
| | Ray Intersects Triangle (Moller and Trumbore algorithm)
|
| |
| bool | SegmentIntersectsTriangle (su2double point0[3], const su2double point1[3], su2double vert0[3], su2double vert1[3], su2double vert2[3]) |
| | Segment Intersects Triangle.
|
| |
| bool | SegmentIntersectsLine (const su2double point0[2], const su2double point1[2], const su2double vert0[2], const su2double vert1[2]) |
| | Segment Intersects Line (for 2D FFD Intersection)
|
| |
| void | RegisterCoordinates () const |
| | Register the coordinates of the mesh nodes.
|
| |
| void | UpdateCustomBoundaryConditions (CGeometry **geometry_container, CConfig *config) |
| | Update the multi-grid structure for the customized boundary conditions.
|
| |
| const su2double * | GetAverageTurboNormal (unsigned short val_marker, unsigned short val_span) const |
| | Get the average normal at a specific span for a given marker in the turbomachinery reference of frame.
|
| |
| const su2double * | GetAverageNormal (unsigned short val_marker, unsigned short val_span) const |
| | Get the average normal at a specific span for a given marker.
|
| |
| su2double | GetSpanArea (unsigned short val_marker, unsigned short val_span) const |
| | Get the value of the total area for each span.
|
| |
| su2double | GetTurboRadius (unsigned short val_marker, unsigned short val_span) const |
| | Get the value of the total area for each span.
|
| |
| su2double | GetAverageTangGridVel (unsigned short val_marker, unsigned short val_span) const |
| | Get the value of the average tangential rotational velocity for each span.
|
| |
| su2double | GetTangGridVelIn (unsigned short val_marker, unsigned short val_span) const |
| | Get the value of the inflow tangential velocity at each span.
|
| |
| su2double | GetTangGridVelOut (unsigned short val_marker, unsigned short val_span) const |
| | Get the value of the outflow tangential velocity at each span.
|
| |
| su2double | GetSpanAreaIn (unsigned short val_marker, unsigned short val_span) const |
| | Get the value of the inflow area at each span.
|
| |
| su2double | GetSpanAreaOut (unsigned short val_marker, unsigned short val_span) const |
| | Get the value of the outflow area at each span.
|
| |
| su2double | GetTurboRadiusIn (unsigned short val_marker, unsigned short val_span) const |
| | Get the value of the inflow radius at each span.
|
| |
| su2double | GetTurboRadiusOut (unsigned short val_marker, unsigned short val_span) const |
| | Get the value of the outflow radius at each span.
|
| |
| void | SetTangGridVelIn (su2double value, unsigned short val_marker, unsigned short val_span) |
| | Set the value of the inflow tangential velocity at each span.
|
| |
| void | SetTangGridVelOut (su2double value, unsigned short val_marker, unsigned short val_span) |
| | Set the value of the outflow tangential velocity at each span.
|
| |
| void | SetSpanAreaIn (su2double value, unsigned short val_marker, unsigned short val_span) |
| | Set the value of the inflow area at each span.
|
| |
| void | SetSpanAreaOut (su2double value, unsigned short val_marker, unsigned short val_span) |
| | Set the value of the outflow area at each span.
|
| |
| void | SetTurboRadiusIn (su2double value, unsigned short val_marker, unsigned short val_span) |
| | Set the value of the inflow radius at each span.
|
| |
| void | SetTurboRadiusOut (su2double value, unsigned short val_marker, unsigned short val_span) |
| | Set the value of the outflow radius at each span.
|
| |
| unsigned long | GetnTotVertexSpan (unsigned short val_marker, unsigned short val_span) const |
| | A total number of vertex independently from the MPI partions.
|
| |
| su2double | GetMinAngularCoord (unsigned short val_marker, unsigned short val_span) const |
| | min angular pitch independently from the MPI partions.
|
| |
| su2double | GetMaxAngularCoord (unsigned short val_marker, unsigned short val_span) const |
| | max angular pitch independently from the MPI partions.
|
| |
| su2double | GetMinRelAngularCoord (unsigned short val_marker, unsigned short val_span) const |
| | min Relatice angular coord independently from the MPI partions.
|
| |
| const su2double * | GetAverageGridVel (unsigned short val_marker, unsigned short val_span) const |
| | Get the average grid velocity at a specific span for a given marker.
|
| |
| su2double | GetCustomBoundaryTemperature (unsigned short val_marker, unsigned long val_vertex) const |
| | Get the value of the customized temperature at a specified vertex on a specified marker.
|
| |
| void | SetCustomBoundaryTemperature (unsigned short val_marker, unsigned long val_vertex, su2double val_customBoundaryTemperature) |
| | Set the value of the customized temperature at a specified vertex on a specified marker.
|
| |
| su2double | GetCustomBoundaryHeatFlux (unsigned short val_marker, unsigned long val_vertex) const |
| | Get the value of the customized normal heat flux at a specified vertex on a specified marker.
|
| |
| void | SetCustomBoundaryHeatFlux (unsigned short val_marker, unsigned long val_vertex, su2double val_customBoundaryHeatFlux) |
| | Set the value of the customized normal heat flux at a specified vertex on a specified marker.
|
| |
| template<class T > |
| void | SetMultiGridMarkerQuantity (const CGeometry *fine_grid, unsigned short val_marker, T &wall_quantity) |
| | Set a representative wall value of the agglomerated control volumes on a particular boundary marker.
|
| |
| void | FilterValuesAtElementCG (const vector< su2double > &filter_radius, const vector< pair< ENUM_FILTER_KERNEL, su2double > > &kernels, const unsigned short search_limit, su2double *values) const |
| | Filter values given at the element CG by performing a weighted average over a radial neighbourhood.
|
| |
| void | GetGlobalElementAdjacencyMatrix (vector< unsigned long > &neighbour_start, long *&neighbour_idx) const |
| | Build the global (entire mesh!) adjacency matrix for the elements in compressed format. Used by FilterValuesAtElementCG to search for geometrically close neighbours.
|
| |
| bool | GetRadialNeighbourhood (const unsigned long iElem_global, const passivedouble radius, size_t search_limit, const vector< unsigned long > &neighbour_start, const long *neighbour_idx, const su2double *cg_elem, vector< long > &neighbours, vector< bool > &is_neighbor) const |
| | Get the neighbours of the global element in the first position of "neighbours" that are within "radius" of it.
|
| |
| void | SetElemVolume () |
| | Compute and store the volume of the primal elements.
|
| |
| void | SetMGLevel (unsigned short val_iMesh) |
| | Set the multigrid index for the current geometry object.
|
| |
| unsigned short | GetMGLevel () const |
| | Get the multigrid index for the current geometry object.
|
| |
| void | ColorMGLevels (unsigned short nMGLevels, const CGeometry *const *geometry) |
| | Color multigrid levels for visualization.
|
| |
| const LDUSparsePattern & | GetSparsePattern (ConnectivityType type, unsigned long fillLvl=0) |
| | Get the sparse pattern of "type" with given level of fill.
|
| |
| const su2vector< su2uint > & | GetLToUTransposeSparsePatternMap (ConnectivityType type) |
| | Get the bijective map from L-entry indices to U-entry indices of their transposes.
|
| |
| const su2vector< su2uint > & | GetUToLTransposeSparsePatternMap (ConnectivityType type) |
| | Get the bijective map from U-entry indices to L-entry indices of their transposes.
|
| |
| const CCompressedSparsePatternUL & | GetEdgeColoring (su2double *efficiency=nullptr, bool maximizeEdgeColorGroupSize=false) |
| | Get the edge coloring.
|
| |
| void | SetNaturalEdgeColoring () |
| | Force the natural (sequential) edge coloring.
|
| |
| unsigned long | GetEdgeColorGroupSize () const |
| | Get the group size used in edge coloring.
|
| |
| const CCompressedSparsePatternUL & | GetElementColoring (su2double *efficiency=nullptr) |
| | Get the element coloring.
|
| |
| void | SetNaturalElementColoring () |
| | Force the natural (sequential) element coloring.
|
| |
| unsigned long | GetElementColorGroupSize () const |
| | Get the group size used in element coloring.
|
| |
| const CLineletInfo & | GetLineletInfo (const CConfig *config) const |
| | Get the linelet definition, this function computes the linelets if that has not been done yet.
|
| |
| void | SetnNonconvexElements (unsigned long nonconvex_elems) |
| | Set the amount of nonconvex elements in the mesh.
|
| |
| unsigned long | GetnNonconvexElements () const |
| | Get the amount of nonconvex elements in the mesh.
|
| |
|
| using | PassiveRequest = typename SelectMPIWrapper< passivedouble >::W::Request |
| |
| static void | UpdateGeometry (CGeometry **geometry_container, CConfig *config) |
| | Update the multi-grid structure and the wall-distance.
|
| |
| static void | ComputeWallDistance (const CConfig *const *config_container, CGeometry ****geometry_container, const int record_zone=-1) |
| | Compute the distances to the closest vertex on viscous walls over the entire domain.
|
| |
| CPrimalGrid ** | elem {nullptr} |
| | Element vector (primal grid information).
|
| |
| CPrimalGrid *** | bound {nullptr} |
| | Boundary vector (primal grid information).
|
| |
| CPoint * | nodes {nullptr} |
| | Node vector (dual grid information).
|
| |
| CEdge * | edges {nullptr} |
| | Edge vector (dual grid information).
|
| |
| CVertex *** | vertex {nullptr} |
| | Boundary Vertex vector (dual grid information).
|
| |
| CTurboVertex **** | turbovertex |
| | Boundary Vertex vector ordered for turbomachinery calculation(dual grid information).
|
| |
| unsigned long * | nVertex {nullptr} |
| | Number of vertex for each marker.
|
| |
| unsigned long * | nElem_Bound {nullptr} |
| | Number of elements of the boundary.
|
| |
| string * | Tag_to_Marker {nullptr} |
| | Names of boundary markers.
|
| |
| vector< std::unordered_map< unsigned long, std::array< su2double, MAXNDIM > > > | symmetryNormals |
| | Bool if boundary-marker is straight(2D)/plane(3D) for each local marker.
|
| |
| vector< bool > | boundIsStraight |
| |
| vector< su2double > | SurfaceAreaCfgFile |
| | Total Surface area for all markers.
|
| |
| unordered_map< unsigned long, unsigned long > | Global_to_Local_Elem |
| | Mapping of global to local index for elements.
|
| |
| unsigned long * | beg_node {nullptr} |
| | Array containing the first node on each rank due to a linear partitioning by global index.
|
| |
| unsigned long * | end_node |
| | Array containing the last node on each rank due to a linear partitioning by global index.
|
| |
| unsigned long * | nPointLinear {nullptr} |
| | Array containing the total number of nodes on each rank due to a linear partioning by global index.
|
| |
| unsigned long * | nPointCumulative {nullptr} |
| | Cumulative storage array containing the total number of points on all prior ranks in the linear partitioning.
|
| |
| int | maxCountPerPoint {0} |
| | Maximum number of pieces of data sent per vertex in point-to-point comms.
|
| |
| int | nP2PSend {0} |
| | Number of sends during point-to-point comms.
|
| |
| int | nP2PRecv {0} |
| | Number of receives during point-to-point comms.
|
| |
| int * | nPoint_P2PSend |
| | Data structure holding number of vertices for each send in point-to-point comms.
|
| |
| int * | nPoint_P2PRecv |
| | Data structure holding number of vertices for each recv in point-to-point comms.
|
| |
| int * | Neighbors_P2PSend |
| | Data structure holding the ranks of the neighbors for point-to-point send comms.
|
| |
| int * | Neighbors_P2PRecv |
| | Data structure holding the ranks of the neighbors for point-to-point recv comms.
|
| |
| map< int, int > | P2PSend2Neighbor |
| | Data structure holding the reverse mapping of the ranks of the neighbors for point-to-point send comms.
|
| |
| map< int, int > | P2PRecv2Neighbor |
| | Data structure holding the reverse mapping of the ranks of the neighbors for point-to-point recv comms.
|
| |
| unsigned long * | Local_Point_P2PSend {nullptr} |
| | Data structure holding the local index of all vertices to be sent in point-to-point comms.
|
| |
| unsigned long * | Local_Point_P2PRecv {nullptr} |
| | Data structure holding the local index of all vertices to be received in point-to-point comms.
|
| |
| su2double * | bufD_P2PRecv {nullptr} |
| | Data structure for su2double point-to-point receive.
|
| |
| su2double * | bufD_P2PSend {nullptr} |
| | Data structure for su2double point-to-point send.
|
| |
| unsigned short * | bufS_P2PRecv {nullptr} |
| | Data structure for unsigned long point-to-point receive.
|
| |
| unsigned short * | bufS_P2PSend {nullptr} |
| | Data structure for unsigned long point-to-point send.
|
| |
| SU2_MPI::Request * | req_P2PSend {nullptr} |
| | Data structure for point-to-point send requests.
|
| |
| SU2_MPI::Request * | req_P2PRecv {nullptr} |
| | Data structure for point-to-point recv requests.
|
| |
| PassiveRequest * | reqP_P2PSend {nullptr} |
| | Data structure for point-to-point send requests.
|
| |
| PassiveRequest * | reqP_P2PRecv {nullptr} |
| | Data structure for point-to-point recv requests.
|
| |
| int | maxCountPerPeriodicPoint {0} |
| | Maximum number of pieces of data sent per vertex in periodic comms.
|
| |
| int | nPeriodicSend {0} |
| | Number of sends during periodic comms.
|
| |
| int | nPeriodicRecv {0} |
| | Number of receives during periodic comms.
|
| |
| int * | nPoint_PeriodicSend |
| | Data structure holding number of vertices for each send in periodic comms.
|
| |
| int * | nPoint_PeriodicRecv |
| | Data structure holding number of vertices for each recv in periodic comms.
|
| |
| int * | Neighbors_PeriodicSend |
| | Data structure holding the ranks of the neighbors for periodic send comms.
|
| |
| int * | Neighbors_PeriodicRecv |
| | Data structure holding the ranks of the neighbors for periodic recv comms.
|
| |
| map< int, int > | PeriodicSend2Neighbor |
| | Data structure holding the reverse mapping of the ranks of the neighbors for periodic send comms.
|
| |
| map< int, int > | PeriodicRecv2Neighbor |
| | Data structure holding the reverse mapping of the ranks of the neighbors for periodic recv comms.
|
| |
| unsigned long * | Local_Point_PeriodicSend |
| | Data structure holding the local index of all vertices to be sent in periodic comms.
|
| |
| unsigned long * | Local_Point_PeriodicRecv {nullptr} |
| | Data structure holding the local index of all vertices to be received in periodic comms.
|
| |
| unsigned long * | Local_Marker_PeriodicSend {nullptr} |
| | Data structure holding the local index of the periodic marker for a particular vertex to be sent in periodic comms.
|
| |
| unsigned long * | Local_Marker_PeriodicRecv {nullptr} |
| | Data structure holding the local index of the periodic marker for a particular vertex to be received in periodic comms.
|
| |
| su2double * | bufD_PeriodicRecv {nullptr} |
| | Data structure for su2double periodic receive.
|
| |
| su2double * | bufD_PeriodicSend {nullptr} |
| | Data structure for su2double periodic send.
|
| |
| unsigned short * | bufS_PeriodicRecv {nullptr} |
| | Data structure for unsigned long periodic receive.
|
| |
| unsigned short * | bufS_PeriodicSend {nullptr} |
| | Data structure for unsigned long periodic send.
|
| |
| SU2_MPI::Request * | req_PeriodicSend {nullptr} |
| | Data structure for periodic send requests.
|
| |
| SU2_MPI::Request * | req_PeriodicRecv {nullptr} |
| | Data structure for periodic recv requests.
|
| |
| vector< su2double > | Orthogonality |
| | Measure of dual CV orthogonality angle (0 to 90 deg., 90 being best).
|
| |
| vector< su2double > | Aspect_Ratio |
| | Measure of dual CV aspect ratio (max face area / min face area).
|
| |
| vector< su2double > | Volume_Ratio |
| | Measure of dual CV volume ratio (max sub-element volume / min sub-element volume).
|
| |
| const ColMajorMatrix< uint8_t > & | CoarseGridColor = CoarseGridColor_ |
| | Coarse grid levels, colorized.
|
| |
| enum | : size_t { OMP_MIN_SIZE = 32
} |
| |
| enum | : size_t { MAXNDIM = 3
} |
| |
| const int | size {SINGLE_NODE} |
| | MPI Size.
|
| |
| const int | rank {MASTER_NODE} |
| | MPI Rank.
|
| |
| unsigned long | nPoint {0} |
| | Number of points of the mesh.
|
| |
| unsigned long | nPointDomain {0} |
| | Number of real points of the mesh.
|
| |
| unsigned long | nPointGhost {0} |
| | Number of ghost points of the mesh.
|
| |
| unsigned long | Global_nPoint {0} |
| | Total number of nodes in a simulation across all processors (including halos).
|
| |
| unsigned long | Global_nPointDomain |
| | Total number of nodes in a simulation across all processors (excluding halos).
|
| |
| unsigned long | nElem {0} |
| | Number of elements of the mesh.
|
| |
| unsigned long | Global_nElem {0} |
| | Total number of elements in a simulation across all processors (all types).
|
| |
| unsigned long | Global_nElemDomain |
| | Total number of elements in a simulation across all processors (excluding halos).
|
| |
| unsigned long | nEdge {0} |
| | Number of edges of the mesh.
|
| |
| unsigned long | nFace {0} |
| | Number of faces of the mesh.
|
| |
| unsigned long | nelem_edge {0} |
| | Number of edges in the mesh.
|
| |
| unsigned long | Global_nelem_edge {0} |
| | Total number of edges in the mesh across all processors.
|
| |
| unsigned long | nelem_triangle {0} |
| | Number of triangles in the mesh.
|
| |
| unsigned long | Global_nelem_triangle {0} |
| | Total number of triangles in the mesh across all processors.
|
| |
| unsigned long | nelem_quad {0} |
| | Number of quadrangles in the mesh.
|
| |
| unsigned long | Global_nelem_quad {0} |
| | Total number of quadrangles in the mesh across all processors.
|
| |
| unsigned long | nelem_tetra {0} |
| | Number of tetrahedra in the mesh.
|
| |
| unsigned long | Global_nelem_tetra {0} |
| | Total number of tetrahedra in the mesh across all processors.
|
| |
| unsigned long | nelem_hexa {0} |
| | Number of hexahedra in the mesh.
|
| |
| unsigned long | Global_nelem_hexa {0} |
| | Total number of hexahedra in the mesh across all processors.
|
| |
| unsigned long | nelem_prism {0} |
| | Number of prisms in the mesh.
|
| |
| unsigned long | Global_nelem_prism {0} |
| | Total number of prisms in the mesh across all processors.
|
| |
| unsigned long | nelem_pyramid {0} |
| | Number of pyramids in the mesh.
|
| |
| unsigned long | Global_nelem_pyramid {0} |
| | Total number of pyramids in the mesh across all processors.
|
| |
| unsigned long | nelem_edge_bound {0} |
| | Number of edges on the mesh boundaries.
|
| |
| unsigned long | Global_nelem_edge_bound {0} |
| | Total number of edges on the mesh boundaries across all processors.
|
| |
| unsigned long | nelem_triangle_bound {0} |
| | Number of triangles on the mesh boundaries.
|
| |
| unsigned long | Global_nelem_triangle_bound |
| | Total number of triangles on the mesh boundaries across all processors.
|
| |
| unsigned long | nelem_quad_bound {0} |
| | Number of quads on the mesh boundaries.
|
| |
| unsigned long | Global_nelem_quad_bound {0} |
| | Total number of quads on the mesh boundaries across all processors.
|
| |
| unsigned long | nNonconvexElements {0} |
| | Number of nonconvex elements in the mesh.
|
| |
| unsigned short | nDim {0} |
| | Number of dimension of the problem.
|
| |
| unsigned short | nZone {0} |
| | Number of zones in the problem.
|
| |
| unsigned short | nMarker {0} |
| | Number of different markers of the mesh.
|
| |
| unsigned short | nCommLevel {0} |
| | Number of non-blocking communication levels.
|
| |
| unsigned short | MGLevel {0} |
| | The mesh level index for the current geometry container.
|
| |
| unsigned long | Max_GlobalPoint {0} |
| | Greater global point in the domain local structure.
|
| |
| short * | Marker_All_SendRecv {nullptr} |
| | MPI Marker.
|
| |
| su2double ** | CustomBoundaryTemperature {nullptr} |
| |
| su2double ** | CustomBoundaryHeatFlux {nullptr} |
| |
| vector< vector< su2double > > | Xcoord_plane |
| | Vector containing x coordinates of new points appearing on a single plane.
|
| |
| vector< vector< su2double > > | Ycoord_plane |
| | Vector containing y coordinates of new points appearing on a single plane.
|
| |
| vector< vector< su2double > > | Zcoord_plane |
| | Vector containing z coordinates of new points appearing on a single plane.
|
| |
| vector< vector< su2double > > | FaceArea_plane |
| | Vector containing area/volume associated with new points appearing on a single plane.
|
| |
| vector< vector< unsigned long > > | Plane_points |
| | Vector containing points appearing on a single plane.
|
| |
| vector< su2double > | XCoordList |
| | Vector containing points appearing on a single plane.
|
| |
| unsigned short * | nSpanWiseSections |
| | Number of Span wise section for each turbo marker, indexed by inflow/outflow.
|
| |
| unsigned short * | nSpanSectionsByMarker {nullptr} |
| | Number of Span wise section for each turbo marker, indexed by marker. Needed for deallocation.
|
| |
| unsigned short | nTurboPerf {0} |
| | Number of Span wise section for each turbo marker.
|
| |
| su2double ** | SpanWiseValue {nullptr} |
| | Span wise values for each turbo marker.
|
| |
| long ** | nVertexSpan {nullptr} |
| | number of vertexes for span wise section for each marker.
|
| |
| unsigned long ** | nTotVertexSpan {nullptr} |
| | number of vertexes at each span wise section for each marker.
|
| |
| unsigned long | nVertexSpanMax [3] |
| | max number of vertexes for each span section for each marker flag.
|
| |
| su2double *** | AverageTurboNormal {nullptr} |
| | Average boundary normal at each span wise section for each marker in the turbomachinery frame of reference.
|
| |
| su2double *** | AverageNormal {nullptr} |
| | Average boundary normal at each span wise section for each marker.
|
| |
| su2double *** | AverageGridVel |
| | Average boundary grid velocity at each span wise section for each marker.
|
| |
| su2double ** | AverageTangGridVel |
| | Average tangential rotational speed at each span wise section for each marker.
|
| |
| su2double ** | SpanArea {nullptr} |
| | Area at each span wise section for each marker.
|
| |
| su2double ** | MaxAngularCoord {nullptr} |
| | Max angular pitch at each span wise section for each marker.
|
| |
| su2double ** | MinAngularCoord {nullptr} |
| | Max angular pitch at each span wise section for each marker.
|
| |
| su2double ** | MinRelAngularCoord |
| | Min relative angular coord at each span wise section for each marker.
|
| |
| su2double ** | TurboRadius {nullptr} |
| | Radius at each span wise section for each marker.
|
| |
| su2double ** | TangGridVelIn {nullptr} |
| |
| su2double ** | TangGridVelOut {nullptr} |
| | Average tangential rotational speed at each span wise section for each turbomachinery marker.
|
| |
| su2double ** | SpanAreaIn {nullptr} |
| |
| su2double ** | SpanAreaOut {nullptr} |
| | Area at each span wise section for each turbomachinery marker.
|
| |
| su2double ** | TurboRadiusIn {nullptr} |
| |
| su2double ** | TurboRadiusOut {nullptr} |
| | Radius at each span wise section for each turbomachinery marker.
|
| |
| LDUSparsePattern | finiteVolumePatternFill0 |
| | FVM sparsity with 0-fill (structural pattern).
|
| |
| LDUSparsePattern | finiteVolumePatternFillN |
| | FVM sparsity with N-fill (e.g. for ILU-N).
|
| |
| LDUSparsePattern | finiteElementPatternFill0 |
| | FEM sparsity with 0-fill (structural pattern).
|
| |
| LDUSparsePattern | finiteElementPatternFillN |
| | FEM sparsity with N-fill (e.g. for ILU-N).
|
| |
| su2vector< su2uint > | finiteVolumeLToUTranspMap |
| | FVM L-entry -> U-entry of its transpose.
|
| |
| su2vector< su2uint > | finiteVolumeUToLTranspMap |
| | FVM U-entry -> L-entry of its transpose.
|
| |
| su2vector< su2uint > | finiteElementLToUTranspMap |
| | FEM L-entry -> U-entry of its transpose.
|
| |
| su2vector< su2uint > | finiteElementUToLTranspMap |
| | FEM U-entry -> L-entry of its transpose.
|
| |
| CCompressedSparsePatternUL | edgeColoring |
| | Edge coloring structure for thread-based parallelization.
|
| |
| CCompressedSparsePatternUL | elemColoring |
| | Element coloring structure for thread-based parallelization.
|
| |
| unsigned long | edgeColorGroupSize {1} |
| | Size of the edge groups within each color.
|
| |
| unsigned long | elemColorGroupSize {1} |
| | Size of the element groups within each color.
|
| |
| ColMajorMatrix< uint8_t > | CoarseGridColor_ |
| | Coarse grid levels, colorized.
|
| |
| CLineletInfo | lineletInfo |
| |
Public Member Functions inherited from CGeometry
1.9.8