Convective Schemes

This page lists the convective schemes available in SU2 and their associated options, it is not meant as a detailed theory guide but some application guidance is given nonetheless. The options listed here do not apply to the high order DG solver.

• Introduction
• Compressible Flow
  • Central Schemes
  • Upwind Schemes
• Incompressible Flow
  • Central Schemes
  • Upwind Schemes
• Turbulence and Scalar/Species Equations

Introduction

Convective schemes are used in the FVM discretization of convective fluxes through the faces of the dual-grid control volumes. They are selected via option CONV_NUM_METHOD_FLOW and fall under the two broad categories of central and upwind. Central schemes tend to be more robust whereas second order upwind schemes can be more accurate (i.e. less dissipative). To achieve second-order in space, upwind schemes need to be used with MUSCL reconstruction (MUSCL_FLOW = YES), see the Slope Limiters and Shock Resolution page for the MUSCL-related options.

Note: MUSCL options have no effect on central schemes or on coarse multigrid levels in general.

Compressible Flow

Central Schemes

• JST - Jameson-Schmidt-Turkel scheme with scalar dissipation defined by the second and fourth order dissipation coefficients in option JST_SENSOR_COEFF = (2nd, 4th) the default values are 0.5 and 0.02 respectively. This scheme offers a good compromise between accuracy and robustness but it will over predict viscous drag contributions in low-Re meshes.
• JST_KE - Equivalent to JST with 0 fourth order coefficient (the computational effort is slightly reduced as solution Laplacians no longer need to be computed);
• JST_MAT - Jameson-Schmidt-Turkel scheme with matrix dissipation, the classical dissipation term is scaled by the flux Jacobian with the minimum Eigenvalue limited by ENTROPY_FIX_COEFF (0.05-0.2 is recommended, larger means more numerical dissipation). This scheme gives better viscous drag predictions on low-Re meshes than JST.
• LAX-FRIEDRICH - The simplest of central schemes with a first order dissipation term specified via LAX_SENSOR_COEFF (the default is 0.15), this scheme is the most stable and least accurate due to its very dissipative nature.

The option CENTRAL_JACOBIAN_FIX_FACTOR (default value 4.0) affects all central schemes. In implicit time marching it improves the numerical properties of the Jacobian matrix so that higher CFL values can be used. To maintain CFL at lower-than-default values of dissipation coefficients, a higher factor should be used. JST_MAT benefits from higher values (~8.0).

Note: The Lax-Friedrich scheme is always used on coarse multigrid levels when any central scheme is selected. All compressible central schemes use vectorization, see the build instructions for how to tune the compilation for maximum performance.

Upwind Schemes

• ROE - Classic Roe scheme;
• L2ROE - Low dissipation Low Mach Roe (L^2 Roe);
• LMROE - Rieper’s Low Mach Roe;
• TURKEL_PREC - Roe scheme with Turkel preconditioning;
• AUSM - Advection Upstream Splitting Method;
• AUSMPLUSUP - AUSM+up, revised Mach and pressure splittings;
• AUSMPLUSUP2 - AUSM+up2, uses an alternative pressure flux formulation;
• SLAU - Simple Low dissipation AUSM scheme;
• SLAU2 - SLAU with the alternative pressure flux formulation;
• HLLC - Harten-Lax-van Leer-Contact;
• MSW - Modified Steger-Warming.

Some of the schemes above have tunning parameters or accept extra options, the following table lists those options and indicates to which schemes they apply (if a scheme does not appear on the table, no options apply to it).

• ROE_KAPPA, default 0.5, constant that multiplies the left and right state sum;
• ENTROPY_FIX_COEFF, default 0.001, puts a lower bound on dissipation by limiting the minimum convective Eigenvalue to a fraction of the speed of sound. Increasing it may help overcome convergence issues, at the expense of making the solution sensitive to this parameter.
• ROE_LOW_DISSIPATION, default NONE, methods to reduce dissipation in regions where certain conditions are verified, FD (wall distance based), NTS (Travin and Shur), FD_DUCROS and NTS_DUCROS as before plus Ducros’ shock sensor;
• USE_ACCURATE_FLUX_JACOBIANS, default NO, if set to YES accurate flux Jacobians are used instead of Roe approximates, slower on a per iteration basis but in some cases allows much higher CFL values to be used and therefore faster overall convergence;
• MIN_ROE_TURKEL_PREC and MAX_ROE_TURKEL_PREC, defaults 0.01 and 0.2 respectively, reference Mach numbers for Turkel preconditioning;

Note: Some schemes are not compatible with all other features of SU2, the AUSM family is not compatible with unsteady simulations of moving grids, non-ideal gases are only compatible with the standard Roe and HLLC schemes. The only upwind scheme that uses vectorization is the Roe scheme (ideal gas only), see the build instructions for how to tune the compilation for maximum performance.

Incompressible Flow

Central Schemes

JST and LAX-FRIEDRICH are available with low speed preconditioning, the afforementioned 1st, 2nd, and 4th order dissipation coefficients apply to these schemes but the CENTRAL_JACOBIAN_FIX_FACTOR option does not.

Upwind Schemes

FDS - Flux Difference Splitting with low speed preconditioning, this scheme does not have tuning parameters.

Turbulence and Scalar/Species Equations

The method is selected via option CONV_NUM_METHOD_TURB. Two methods are available, for both compressible and incompressible flows: SCALAR_UPWIND and BOUNDED_SCALAR. The BOUNDED_SCALAR method includes a divergence correction to prevent spurious production/destruction of the transported scalar while convergence is not reached. These methods do not have any special parameters.