-
Configuration File
Mesh File
Restart File
Solver Setup
Physical Definition
Markers and Boundary Conditions
Convective Schemes
Slope Limiters and Shock Resolution
History and Solution Output
Linear Solvers and Preconditioners
Basics of Multi-Zone Computations
Execution
Aeroacoustic analysis of unsteady pressure
Flamelet Solver — Python Wrapper Wall Boundary Conditions
Output Fields Reference
Error Messages
-
Setup Guide: Steady RANS for External Aerodynamics
Setup Guide: Incompressible Flows
Setup Guide: Unsteady Flows and DES
Setup Guide: Laminar-Turbulent Transition
Setup Guide: Turbomachinery
Setup Guide: Heat Transfer and Conjugate Heat Transfer
Setup Guide: Species Transport and Combustion
Setup Guide: Shape Optimization with the Discrete Adjoint
Setup Guide: Non-Ideal Compressible Flows
-
Option Reference
Problem Definition
FluidModel
Data-driven fluid model parameters
Freestream Conditions
Reference Conditions
Boundary Markers
Time-marching
Linear solver definition
Convergence
Multi-grid
Spatial Discretization
Adjoint and Gradient
Sobolev Gradient Solver Parameters
Input/output files and formats
Dynamic mesh definition
Aeroelastic Simulation (Typical Section Model)
Wind Gust
Equivalent Area
Grid deformation
Deformable mesh
FEM flow solver definition
FEA solver
Multizone definition
Radiation solver
Heat solver
Visualize Control Volumes
Inverse design problem
Unsupported options
FFD point inversion
Automatic Differentation options
Python Options
Hybrid_RANSLES Options
Output Options
libROM options
Renamed and Removed Options
-
GIT-ting Started
Developing SU2 on GitHub (Internal Developers)
Running Regression Tests
Code Review
Code Structure
Style Guide
Advanced AD Techniques
Containers for Development
Writing Unit Tests
Integrating Tracy Profiler with SU2
Automatic Differentiation (AD)
Code Reference (Doxygen)
Debugging SU2
Documentation Improvements and Status
Glossary
Docs Check
Renamed and Removed Options
This page lists the options that SU2 had in a release since v7.0.0 but no longer has in commit 6b54b78464. It is made from the release history and from the messages SU2 prints when it reads an old option. If your config file stops with “invalid option name”, look for the option here.
| Option | Last release with it | What SU2 says |
|---|---|---|
ADAPT_BOUNDARY |
v7.1.0 | |
ADJTURB_LIN_ERROR |
v8.0.0 | |
ADJTURB_LIN_ITER |
v8.0.0 | |
ADJTURB_LIN_PREC |
v8.0.0 | |
ADJTURB_LIN_SOLVER |
v8.0.0 | |
ADJ_FSI |
v7.0.3 | |
ANALYTICAL_SURFDEF |
v7.1.0 | |
BUFFET_MONITORING |
v7.0.8 | |
CHT_ROBIN |
v7.0.0 | |
COLLECTIVE_PITCH |
v8.0.0 | |
CONV_CRITERIA |
v7.2.1 | |
CYCLIC_PITCH |
v8.0.0 | |
DATADRIVEN_INITIAL_DENSITY |
v8.4.0 | DATADRIVEN_INITIAL_ENERGY and DATADRIVEN_INITIAL_DENSITY are deprecated, there are no replacements. |
DATADRIVEN_INITIAL_ENERGY |
v8.4.0 | DATADRIVEN_INITIAL_ENERGY and DATADRIVEN_INITIAL_DENSITY are deprecated, there are no replacements. |
DCD_DCMY_VALUE |
v7.2.1 | |
DCM_DIH |
v8.0.0 | |
DEAD_LOAD |
v8.1.0 | DEAD_LOAD is deprecated. Use GRAVITY_FORCE or BODY_FORCE instead. |
DUALVOL_POWER |
v7.1.0 | |
DYNAMIC_ANALYSIS |
v7.5.1 | DYNAMIC_ANALYSIS is deprecated. Use TIME_DOMAIN instead. |
DYN_RESTART_ITER |
v7.1.1 | |
DYN_TIME |
v7.5.1 | DYN_TIME is deprecated. Use MAX_TIME instead. |
DYN_TIMESTEP |
v7.5.1 | DYN_TIMESTEP is deprecated. Use TIME_STEP instead. |
FIXED_CM_MODE |
v7.2.1 | |
FSI_DISCADJ_LIN_PREC_STRUC |
v7.0.3 | |
FSI_DISCADJ_LIN_SOLVER_STRUC |
v7.0.3 | |
FSI_FLUID_PROBLEM |
v7.0.3 | |
FSI_ITER |
v7.0.3 | |
FSI_LINEAR_SOLVER_ERROR_STRUC |
v7.0.3 | |
FSI_LINEAR_SOLVER_ITER_STRUC |
v7.0.3 | |
FSI_LINEAR_SOLVER_PREC_STRUC |
v7.0.3 | |
FSI_LINEAR_SOLVER_STRUC |
v7.0.3 | |
FSI_STRUCTURAL_PROBLEM |
v7.0.3 | |
FULL_TAPE |
v7.0.6 | |
HISTORY_FILE_APPEND |
v8.2.0 | |
HTP_AXIS |
v8.0.0 | |
INC_INLET_USENORMAL |
v8.2.0 | INC_INLET_USENORMAL is deprecated. Use INLET_USE_NORMAL instead (compatible with all solvers). |
JST_SENSOR_COEFF_HEAT |
v7.5.0 | |
KIND_ADAPT |
v7.1.0 | |
KT_CONSTANT |
v7.1.1 | |
MARKER_DIRICHLET |
v7.0.0 | |
MARKER_FLOWLOAD |
v8.0.0 | |
MARKER_NEUMANN |
v7.0.0 | |
MARKER_SINE_LOAD |
v8.0.0 | |
MONOATOMIC |
v7.0.8 | |
NEW_ELEMS |
v7.1.0 | |
NONLINEAR_FEM_INT_ITER |
v7.0.5 | |
OBJ_CHAIN_RULE_COEFF |
v7.2.1 | |
PARMETIS |
v7.0.6 | |
RAMP_OUTLET_PRESSURE |
v8.2.0 | RAMP_OUTLET_PRESSURE is deprectaed. Use RAMP_OUTLET instead |
RAMP_OUTLET_PRESSURE_COEFF |
v8.2.0 | RAMP_OUTLET_PRESSURE_COEFF is deprectaed. Use RAMP_OUTLET_COEFF instead |
RAMP_ROTATING_FRAME |
v8.2.0 | |
RAMP_ROTATING_FRAME_COEFF |
v8.2.0 | |
RELAXATION_FACTOR_ADJFLOW |
v7.0.3 | |
SA_QCR |
v7.3.1 | |
SINGLEZONE_DRIVER |
v7.5.1 | Option SINGLEZONE_DRIVER is deprecated, it does not have a replacement. |
SMOOTH_GEOMETRY |
v8.1.0 | |
SOLID_DENSITY |
v7.1.1 | |
SOLID_TEMPERATURE_INIT |
v7.1.1 | |
SOLID_THERMAL_CONDUCTIVITY |
v7.1.1 | |
SPECIES_USE_STRONG_BC |
v7.5.1 | SPECIES_USE_STRONG_BC is deprecated. Use MARKER_SPECIES_STRONG_BC= (marker1, …) instead. |
SPECIFIC_HEAT_CV |
v7.4.0 | |
START_UP_ITER |
v7.3.0 | |
TARGET_CM |
v7.2.1 | |
THERMAL_DIFFUSIVITY |
v7.1.1 | |
THERMAL_DIFFUSIVITY_SOLID |
v7.1.1 | |
UNST_RESTART_ITER |
v7.1.1 | |
USING_UQ |
v7.3.1 | |
VISUALIZE_SURFACE_DEF |
v7.0.8 | |
VISUALIZE_VOLUME_DEF |
v7.0.8 | |
WALLMODELB |
v7.2.0 | |
WALLMODELKAPPA |
v7.2.0 | |
WRT_BINARY_RESTART |
v7.0.8 | |
WRT_CON_FREQ |
v7.0.8 | |
WRT_CON_FREQ_DUALTIME |
v7.0.8 | |
WRT_CRD_SOL |
v7.0.8 | |
WRT_CSV_SOL |
v7.0.8 | |
WRT_HALO |
v7.0.8 | |
WRT_LIMITERS |
v7.0.8 | |
WRT_MESH_QUALITY |
v7.0.7 | |
WRT_OUTPUT |
v7.0.8 | |
WRT_RESIDUALS |
v7.0.8 | |
WRT_SHARPEDGES |
v7.0.8 | |
WRT_SLICE |
v7.0.8 | |
WRT_SOL_FREQ |
v7.0.8 | |
WRT_SOL_FREQ_DUALTIME |
v7.0.8 | |
WRT_SRF_SOL |
v7.0.8 | |
WRT_SURFACE |
v7.0.8 | |
WRT_SURF_FREQ_DUALTIME |
v7.0.8 | |
WRT_VOL_SOL |
v7.0.8 |